From 3631931c134b46630ac90a29148941b4b38f7f35 Mon Sep 17 00:00:00 2001
From: KenwoodFox <kenwood364@gmail.com>
Date: Tue, 2 Nov 2021 22:52:57 -0400
Subject: [PATCH] import prev settings

---
 CR10/gcode/after_print.gcode  | 13 ++++++++++++
 CR10/gcode/before_print.gcode | 38 +++++++++++++++++++++++++++++++++++
 2 files changed, 51 insertions(+)
 create mode 100644 CR10/gcode/after_print.gcode
 create mode 100644 CR10/gcode/before_print.gcode

diff --git a/CR10/gcode/after_print.gcode b/CR10/gcode/after_print.gcode
new file mode 100644
index 0000000..60fabd8
--- /dev/null
+++ b/CR10/gcode/after_print.gcode
@@ -0,0 +1,13 @@
+G91 ;Relative positioning
+G1 E-2 F2700 ;Retract a bit
+G1 E-2 Z0.2 F2400 ;Retract and raise Z
+G1 X5 Y5 F3000 ;Wipe out
+G1 Z10 ;Raise Z more
+G90 ;Absolute positioning
+
+G1 X0 Y{machine_depth} ;Present print
+M106 S0 ;Turn-off fan
+M104 S0 ;Turn-off hotend
+M140 S0 ;Turn-off bed
+
+M84 X Y E ;Disable all steppers but Z
diff --git a/CR10/gcode/before_print.gcode b/CR10/gcode/before_print.gcode
new file mode 100644
index 0000000..0cca37b
--- /dev/null
+++ b/CR10/gcode/before_print.gcode
@@ -0,0 +1,38 @@
+; Script based on an original created by tjjfvi (https://github.com/tjjfvi)
+; An up-to-date version of the tjjfvi's original script can be found
+; here:  https://csi.t6.fyi/
+; Note - This script will only work in Cura V4.2 and above!
+; --- Global Settings
+; layer_height = {layer_height}
+; smooth_spiralized_contours = {smooth_spiralized_contours}
+; magic_mesh_surface_mode = {magic_mesh_surface_mode}
+; machine_extruder_count = {machine_extruder_count}
+; --- Single Extruder Settings
+; speed_z_hop = {speed_z_hop}
+; retraction_amount = {retraction_amount}
+; retraction_hop = {retraction_hop}
+; retraction_hop_enabled = {retraction_hop_enabled}
+; retraction_enable = {retraction_enable}
+; retraction_speed = {retraction_speed}
+; retraction_retract_speed = {retraction_retract_speed}
+; retraction_prime_speed = {retraction_prime_speed}
+; speed_travel = {speed_travel}
+
+
+M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
+M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
+M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
+M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
+M220 S100 ;Reset Feedrate
+M221 S100 ;Reset Flowrate
+
+G28 ;Home
+
+G92 E0 ;Reset Extruder
+G1 Z2.0 F3000 ;Move Z Axis up
+G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
+G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
+G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
+G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
+G92 E0 ;Reset Extruder
+G1 Z2.0 F3000 ;Move Z Axis up