// Include the esp wifi lib
#include <ESP8266WiFi.h>
// Include the mqtt client lib
#include <PubSubClient.h>

// Include the settings.h.
#include "window_control_settings.h"

#define buzzer 2
#define motorForward 1
#define motorReverse 0
#define sense 3

WiFiClient espClient;
PubSubClient client;

void setup() {
  setup_wifi();
  client.setClient(espClient);
  client.setServer(MQTT_SERVER, MQTT_PORT);
  client.setCallback(callback);
  
  // Initalize some pins!
  // Initalize buzzer pin
  pinMode(buzzer, OUTPUT);
  digitalWrite(buzzer, LOW);
}

void setup_wifi() {
  delay(10);
  // We start by connecting to a WiFi network
  Serial.println();
  WiFi.hostname("ESP-" WINDOW_NAME);
  Serial.print("Connecting to ");
  Serial.println(WIFI_SSID);

  WiFi.begin(WIFI_SSID, WIFI_PASS);

  while (WiFi.status() != WL_CONNECTED) {
    delay(950);
    tone(buzzer, 1200, 50);
    Serial.println("Not yet connected.. Waiting 1s to check again..");
  }

  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
}

void reconnect() {
  // Loop until we're reconnected
  while (!client.connected()) {
    Serial.print("Attempting MQTT connection...");
    // Attempt to connect
    if (client.connect("ESP8266Client", MQTT_USER, MQTT_PASS)) {
      Serial.println("connected");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      // Wait 5 seconds before retrying
      delay(5000);
    }
  }
}

void callback(char* topic, byte* payload, unsigned int length) {
 Serial.print("Message arrived [");
 Serial.print(topic);
 Serial.print("] ");
 for (int i = 0; i < length; i++) {
  char receivedChar = (char)payload[i];
  Serial.print(receivedChar);
  if (receivedChar == '0')
   //digitalWrite(in_led, LOW);
  if (receivedChar == '1')
   //digitalWrite(in_led, HIGH);
 }
 Serial.println();
}

void loop() {
  // If we ever disconnect, reconnect.
  if (!client.connected()) {
    reconnect();
  }

  // Run the client loop
  client.loop();

  // Publishes a random 0 and 1 like someone switching off and on randomly (random(2))
  client.publish(MQTT_ROOT "/random", String(random(2)).c_str(), true);
  delay(1000);
  client.subscribe(MQTT_ROOT "/in");
  tone(buzzer, 2000, 500);
  delay(1000);
}