Corrected Director
This commit is contained in:
Joe S
parent
bd2e33a9d1
commit
95d8b3ae6e
|
|
@ -1,51 +0,0 @@
|
|||
#
|
||||
# Bacula barcode simulation file
|
||||
# used by ${PREFIX}/sbin/chio-bacula (FreeBSD)
|
||||
#
|
||||
# The volumenames are returned by the "changer list" command
|
||||
# labeling in the console is done by "label barcodes"
|
||||
# (then all volumes belog to the default pool).
|
||||
# All Lines with an "#" at the bedinning are ignored
|
||||
#
|
||||
# !!!! If you export an tape and reinsert another one,
|
||||
# !!!! don't forget to change the volume name in this file!
|
||||
#
|
||||
1:Volume1-100
|
||||
2:Volume1-101
|
||||
3:Volume1-102
|
||||
4:Volume1-103
|
||||
5:Volume1-104
|
||||
6:Volume1-105
|
||||
7:Volume1-106
|
||||
8:Volume1-107
|
||||
9:Volume1-108
|
||||
10:Volume1-109
|
||||
11:Volume1-110
|
||||
12:Volume1-111
|
||||
#
|
||||
# Further volumes exported from the changer
|
||||
#
|
||||
# 36GB AIT2 tapes
|
||||
#Volume1-100
|
||||
#Volume1-101
|
||||
#Volume1-102
|
||||
#Volume1-103
|
||||
#Volume1-104
|
||||
#Volume1-105
|
||||
#Volume1-106
|
||||
#Volume1-107
|
||||
#Volume1-108
|
||||
#Volume1-109
|
||||
#Volume1-110
|
||||
#Volume1-111
|
||||
#Volume1-112
|
||||
#Volume1-113
|
||||
#Volume1-114
|
||||
#Volume1-115
|
||||
#
|
||||
# 50GB AIT2 tapes
|
||||
#Volume2-200
|
||||
#Volume2-201
|
||||
#Volume2-202
|
||||
#Volume2-203
|
||||
#Volume2-204
|
||||
|
|
@ -30,17 +30,19 @@ Catalog {
|
|||
|
||||
Autochanger { # New resource
|
||||
Name = Iron-Autochanger
|
||||
Address = 10.85.3.39
|
||||
Address = 10.85.3.34
|
||||
#Address = 10.85.3.35
|
||||
SDPort = 9103
|
||||
Password = "iamnotacrook"
|
||||
Device = Drive-0-LTO-3
|
||||
Device = Drive-1-LTO-3
|
||||
Media Type = LTO-3
|
||||
Maximum Concurrent Jobs = 2
|
||||
}
|
||||
|
||||
Storage { # Can have multiple of these per autochanger
|
||||
Name = Drive-0-LTO-3
|
||||
Address = 10.85.3.39
|
||||
Name = Drive-1-LTO-3
|
||||
Address = 10.85.3.34
|
||||
#Address = 10.85.3.35
|
||||
SDPort = 9103
|
||||
Password = "iamnotacrook"
|
||||
Device = LTO-3
|
||||
|
|
@ -130,6 +132,15 @@ messages { # Send mail to me and Caleb
|
|||
messages { # Send mail to me and Chris
|
||||
name = ChrisMail
|
||||
mail = chrispdo1373@gmail.com,kenwood364@gmail.com = all, !skipped
|
||||
file = "/etc/bacula/scripts/webhooks/ChrisProEliteMail.md" = all, !skipped
|
||||
console = all, !skipped, !saved
|
||||
catalog = all
|
||||
}
|
||||
|
||||
messages { # Send mail to the robotics team
|
||||
name = RoboticsMail
|
||||
mail = kenwood364@gmail.com = all, !skipped
|
||||
file = "/etc/bacula/scripts/webhooks/RoboticsMail.md" = all, !skipped
|
||||
console = all, !skipped, !saved
|
||||
catalog = all
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,324 +0,0 @@
|
|||
#
|
||||
# Default Bacula Director Configuration file
|
||||
#
|
||||
# The only thing that MUST be changed is to add one or more
|
||||
# file or directory names in the Include directive of the
|
||||
# FileSet resource.
|
||||
#
|
||||
# For Bacula release 9.4.2 (04 February 2019) -- ubuntu 20.04
|
||||
#
|
||||
# You might also want to change the default email address
|
||||
# from root to your address. See the "mail" and "operator"
|
||||
# directives in the Messages resource.
|
||||
#
|
||||
# Copyright (C) 2000-2017 Kern Sibbald
|
||||
# License: BSD 2-Clause; see file LICENSE-FOSS
|
||||
#
|
||||
|
||||
Director { # define myself
|
||||
Name = bacula-dir
|
||||
DIRport = 9101 # where we listen for UA connections
|
||||
QueryFile = "/etc/bacula/scripts/query.sql"
|
||||
WorkingDirectory = "/var/lib/bacula"
|
||||
PidDirectory = "/run/bacula"
|
||||
Maximum Concurrent Jobs = 20
|
||||
Password = "p2ee6NtCH6Y-mw3bVk5yGgo1wjXnyne4a" # Console password
|
||||
Messages = Daemon
|
||||
DirAddress = 127.0.0.1
|
||||
}
|
||||
|
||||
JobDefs {
|
||||
Name = "DefaultJob"
|
||||
Type = Backup
|
||||
Level = Incremental
|
||||
Client = bacula-fd
|
||||
FileSet = "Full Set"
|
||||
Schedule = "WeeklyCycle"
|
||||
Storage = File1
|
||||
Messages = Standard
|
||||
Pool = File
|
||||
SpoolAttributes = yes
|
||||
Priority = 10
|
||||
Write Bootstrap = "/var/lib/bacula/%c.bsr"
|
||||
}
|
||||
|
||||
|
||||
#
|
||||
# Define the main nightly save backup job
|
||||
# By default, this job will back up to disk in /nonexistant/path/to/file/archive/dir
|
||||
Job {
|
||||
Name = "BackupClient1"
|
||||
JobDefs = "DefaultJob"
|
||||
}
|
||||
|
||||
#Job {
|
||||
# Name = "BackupClient2"
|
||||
# Client = bacula2-fd
|
||||
# JobDefs = "DefaultJob"
|
||||
#}
|
||||
|
||||
#Job {
|
||||
# Name = "BackupClient1-to-Tape"
|
||||
# JobDefs = "DefaultJob"
|
||||
# Storage = LTO-4
|
||||
# Spool Data = yes # Avoid shoe-shine
|
||||
# Pool = Default
|
||||
#}
|
||||
|
||||
#}
|
||||
|
||||
# Backup the catalog database (after the nightly save)
|
||||
Job {
|
||||
Name = "BackupCatalog"
|
||||
JobDefs = "DefaultJob"
|
||||
Level = Full
|
||||
FileSet="Catalog"
|
||||
Schedule = "WeeklyCycleAfterBackup"
|
||||
# This creates an ASCII copy of the catalog
|
||||
# Arguments to make_catalog_backup.pl are:
|
||||
# make_catalog_backup.pl <catalog-name>
|
||||
RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog"
|
||||
# This deletes the copy of the catalog
|
||||
RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup"
|
||||
Write Bootstrap = "/var/lib/bacula/%n.bsr"
|
||||
Priority = 11 # run after main backup
|
||||
}
|
||||
|
||||
#
|
||||
# Standard Restore template, to be changed by Console program
|
||||
# Only one such job is needed for all Jobs/Clients/Storage ...
|
||||
#
|
||||
Job {
|
||||
Name = "RestoreFiles"
|
||||
Type = Restore
|
||||
Client=bacula-fd
|
||||
Storage = File1
|
||||
# The FileSet and Pool directives are not used by Restore Jobs
|
||||
# but must not be removed
|
||||
FileSet="Full Set"
|
||||
Pool = File
|
||||
Messages = Standard
|
||||
Where = /nonexistant/path/to/file/archive/dir/bacula-restores
|
||||
}
|
||||
|
||||
|
||||
# List of files to be backed up
|
||||
FileSet {
|
||||
Name = "Full Set"
|
||||
Include {
|
||||
Options {
|
||||
signature = MD5
|
||||
}
|
||||
#
|
||||
# Put your list of files here, preceded by 'File =', one per line
|
||||
# or include an external list with:
|
||||
#
|
||||
# File = <file-name
|
||||
#
|
||||
# Note: / backs up everything on the root partition.
|
||||
# if you have other partitions such as /usr or /home
|
||||
# you will probably want to add them too.
|
||||
#
|
||||
# By default this is defined to point to the Bacula binary
|
||||
# directory to give a reasonable FileSet to backup to
|
||||
# disk storage during initial testing.
|
||||
#
|
||||
File = /usr/sbin
|
||||
}
|
||||
|
||||
#
|
||||
# If you backup the root directory, the following two excluded
|
||||
# files can be useful
|
||||
#
|
||||
Exclude {
|
||||
File = /var/lib/bacula
|
||||
File = /nonexistant/path/to/file/archive/dir
|
||||
File = /proc
|
||||
File = /tmp
|
||||
File = /sys
|
||||
File = /.journal
|
||||
File = /.fsck
|
||||
}
|
||||
}
|
||||
|
||||
#
|
||||
# When to do the backups, full backup on first sunday of the month,
|
||||
# differential (i.e. incremental since full) every other sunday,
|
||||
# and incremental backups other days
|
||||
Schedule {
|
||||
Name = "WeeklyCycle"
|
||||
Run = Full 1st sun at 23:05
|
||||
Run = Differential 2nd-5th sun at 23:05
|
||||
Run = Incremental mon-sat at 23:05
|
||||
}
|
||||
|
||||
# This schedule does the catalog. It starts after the WeeklyCycle
|
||||
Schedule {
|
||||
Name = "WeeklyCycleAfterBackup"
|
||||
Run = Full sun-sat at 23:10
|
||||
}
|
||||
|
||||
# This is the backup of the catalog
|
||||
FileSet {
|
||||
Name = "Catalog"
|
||||
Include {
|
||||
Options {
|
||||
signature = MD5
|
||||
}
|
||||
File = "/var/lib/bacula/bacula.sql"
|
||||
}
|
||||
}
|
||||
|
||||
# Client (File Services) to backup
|
||||
Client {
|
||||
Name = bacula-fd
|
||||
Address = localhost
|
||||
FDPort = 9102
|
||||
Catalog = MyCatalog
|
||||
Password = "plfcG_XSfD6EBSD0YQhZThlZNHFFFjqtg" # password for FileDaemon
|
||||
File Retention = 60 days # 60 days
|
||||
Job Retention = 6 months # six months
|
||||
AutoPrune = yes # Prune expired Jobs/Files
|
||||
}
|
||||
|
||||
#
|
||||
# Second Client (File Services) to backup
|
||||
# You should change Name, Address, and Password before using
|
||||
#
|
||||
#Client {
|
||||
# Name = bacula2-fd
|
||||
# Address = localhost2
|
||||
# FDPort = 9102
|
||||
# Catalog = MyCatalog
|
||||
# Password = "plfcG_XSfD6EBSD0YQhZThlZNHFFFjqtg2" # password for FileDaemon 2
|
||||
# File Retention = 60 days # 60 days
|
||||
# Job Retention = 6 months # six months
|
||||
# AutoPrune = yes # Prune expired Jobs/Files
|
||||
#}
|
||||
|
||||
|
||||
# Definition of file Virtual Autochanger device
|
||||
Autochanger {
|
||||
Name = File1
|
||||
# Do not use "localhost" here
|
||||
Address = localhost # N.B. Use a fully qualified name here
|
||||
SDPort = 9103
|
||||
Password = "wyHyTtf3Q5Mul8VvNNtm9D2lsIg2mKBVh"
|
||||
Device = FileChgr1
|
||||
Media Type = File1
|
||||
Maximum Concurrent Jobs = 10 # run up to 10 jobs a the same time
|
||||
Autochanger = File1 # point to ourself
|
||||
}
|
||||
|
||||
# Definition of a second file Virtual Autochanger device
|
||||
# Possibly pointing to a different disk drive
|
||||
Autochanger {
|
||||
Name = File2
|
||||
# Do not use "localhost" here
|
||||
Address = localhost # N.B. Use a fully qualified name here
|
||||
SDPort = 9103
|
||||
Password = "wyHyTtf3Q5Mul8VvNNtm9D2lsIg2mKBVh"
|
||||
Device = FileChgr2
|
||||
Media Type = File2
|
||||
Autochanger = File2 # point to ourself
|
||||
Maximum Concurrent Jobs = 10 # run up to 10 jobs a the same time
|
||||
}
|
||||
|
||||
# Definition of LTO-4 tape Autochanger device
|
||||
#Autochanger {
|
||||
# Name = LTO-4
|
||||
# Do not use "localhost" here
|
||||
# Address = localhost # N.B. Use a fully qualified name here
|
||||
# SDPort = 9103
|
||||
# Password = "wyHyTtf3Q5Mul8VvNNtm9D2lsIg2mKBVh" # password for Storage daemon
|
||||
# Device = LTO-4 # must be same as Device in Storage daemon
|
||||
# Media Type = LTO-4 # must be same as MediaType in Storage daemon
|
||||
# Autochanger = LTO-4 # enable for autochanger device
|
||||
# Maximum Concurrent Jobs = 10
|
||||
#}
|
||||
|
||||
# Generic catalog service
|
||||
Catalog {
|
||||
Name = MyCatalog
|
||||
dbname = "bacula"; DB Address = "localhost"; dbuser = "bacula"; dbpassword = "iamnotacrook"
|
||||
}
|
||||
|
||||
# Reasonable message delivery -- send most everything to email address
|
||||
# and to the console
|
||||
Messages {
|
||||
Name = Standard
|
||||
#
|
||||
# NOTE! If you send to two email or more email addresses, you will need
|
||||
# to replace the %r in the from field (-f part) with a single valid
|
||||
# email address in both the mailcommand and the operatorcommand.
|
||||
# What this does is, it sets the email address that emails would display
|
||||
# in the FROM field, which is by default the same email as they're being
|
||||
# sent to. However, if you send email to more than one address, then
|
||||
# you'll have to set the FROM address manually, to a single address.
|
||||
# for example, a 'no-reply@mydomain.com', is better since that tends to
|
||||
# tell (most) people that its coming from an automated source.
|
||||
|
||||
#
|
||||
mailcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r"
|
||||
operatorcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r"
|
||||
mail = root = all, !skipped
|
||||
operator = root = mount
|
||||
console = all, !skipped, !saved
|
||||
#
|
||||
# WARNING! the following will create a file that you must cycle from
|
||||
# time to time as it will grow indefinitely. However, it will
|
||||
# also keep all your messages if they scroll off the console.
|
||||
#
|
||||
append = "/var/log/bacula/bacula.log" = all, !skipped
|
||||
catalog = all
|
||||
}
|
||||
|
||||
|
||||
#
|
||||
# Message delivery for daemon messages (no job).
|
||||
Messages {
|
||||
Name = Daemon
|
||||
mailcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula daemon message\" %r"
|
||||
mail = root = all, !skipped
|
||||
console = all, !skipped, !saved
|
||||
append = "/var/log/bacula/bacula.log" = all, !skipped
|
||||
}
|
||||
|
||||
# Default pool definition
|
||||
Pool {
|
||||
Name = Default
|
||||
Pool Type = Backup
|
||||
Recycle = yes # Bacula can automatically recycle Volumes
|
||||
AutoPrune = yes # Prune expired volumes
|
||||
Volume Retention = 365 days # one year
|
||||
Maximum Volume Bytes = 50G # Limit Volume size to something reasonable
|
||||
Maximum Volumes = 100 # Limit number of Volumes in Pool
|
||||
}
|
||||
|
||||
# File Pool definition
|
||||
Pool {
|
||||
Name = File
|
||||
Pool Type = Backup
|
||||
Recycle = yes # Bacula can automatically recycle Volumes
|
||||
AutoPrune = yes # Prune expired volumes
|
||||
Volume Retention = 365 days # one year
|
||||
Maximum Volume Bytes = 50G # Limit Volume size to something reasonable
|
||||
Maximum Volumes = 100 # Limit number of Volumes in Pool
|
||||
Label Format = "Vol-" # Auto label
|
||||
}
|
||||
|
||||
|
||||
# Scratch pool definition
|
||||
Pool {
|
||||
Name = Scratch
|
||||
Pool Type = Backup
|
||||
}
|
||||
|
||||
#
|
||||
# Restricted console used by tray-monitor to get the status of the director
|
||||
#
|
||||
Console {
|
||||
Name = bacula-mon
|
||||
Password = "qh2ITlwo3xfTzP8uxwJjq1vJshc1Dsimc"
|
||||
CommandACL = status, .status
|
||||
}
|
||||
|
|
@ -1,49 +0,0 @@
|
|||
#
|
||||
# Default Bacula File Daemon Configuration file
|
||||
#
|
||||
# For Bacula release 9.4.2 (04 February 2019) -- ubuntu 20.04
|
||||
#
|
||||
# There is not much to change here except perhaps the
|
||||
# File daemon Name to
|
||||
#
|
||||
#
|
||||
# Copyright (C) 2000-2015 Kern Sibbald
|
||||
# License: BSD 2-Clause; see file LICENSE-FOSS
|
||||
#
|
||||
|
||||
#
|
||||
# List Directors who are permitted to contact this File daemon
|
||||
#
|
||||
Director {
|
||||
Name = bacula-dir
|
||||
Password = "plfcG_XSfD6EBSD0YQhZThlZNHFFFjqtg"
|
||||
}
|
||||
|
||||
#
|
||||
# Restricted Director, used by tray-monitor to get the
|
||||
# status of the file daemon
|
||||
#
|
||||
Director {
|
||||
Name = bacula-mon
|
||||
Password = "ULdl26830u9xQw1i8YI_VBqaIMG1OfE_V"
|
||||
Monitor = yes
|
||||
}
|
||||
|
||||
#
|
||||
# "Global" File daemon configuration specifications
|
||||
#
|
||||
FileDaemon { # this is me
|
||||
Name = bacula-fd
|
||||
FDport = 9102 # where we listen for the director
|
||||
WorkingDirectory = /var/lib/bacula
|
||||
Pid Directory = /run/bacula
|
||||
Maximum Concurrent Jobs = 20
|
||||
Plugin Directory = /usr/lib/bacula
|
||||
FDAddress = 127.0.0.1
|
||||
}
|
||||
|
||||
# Send all messages except skipped files back to Director
|
||||
Messages {
|
||||
Name = Standard
|
||||
director = bacula-dir = all, !skipped, !restored
|
||||
}
|
||||
|
|
@ -1,38 +0,0 @@
|
|||
Storage { # definition of myself
|
||||
Name = test-bacula-sd # Name of this device
|
||||
SDPort = 9103 # Director's port
|
||||
WorkingDirectory = "/var/lib/bacula" # Working Directory
|
||||
Pid Directory = "/run/bacula" # PID Directory
|
||||
Plugin Directory = "/usr/lib/bacula" # Directory for plugins
|
||||
Maximum Concurrent Jobs = 20 # Max jobs it can do at any one time
|
||||
SDAddress = 127.0.0.1 # Address of the SD
|
||||
}
|
||||
|
||||
Director { # Director who is allowed to contact us
|
||||
Name = bacula-dir # Name of the director
|
||||
Password = "iamnotacrook" # Password for the director to usr to login
|
||||
}
|
||||
|
||||
#Autochanger { # Virtual Auto Changer
|
||||
# Name = FileChgr1 # Has a name
|
||||
# Device = FileChgr1-Dev1 # Seperate tape drives with commas
|
||||
# Changer Command = "" # Not sure what this is for
|
||||
# Changer Device = /dev/null # Device is not real
|
||||
#}
|
||||
|
||||
#Device { # Device for Autochanger
|
||||
# Name = FileChgr1-Dev1 # Has a name
|
||||
# Media Type = File1 # has a type of media
|
||||
# Archive Device = /backup/tape # Archive location(?) not sure on this one
|
||||
# LabelMedia = yes; # lets Bacula label unlabeled media
|
||||
# Random Access = Yes; # Not sure what this is for
|
||||
# AutomaticMount = yes; # when device opened, read it
|
||||
# RemovableMedia = no; # Not sure what this is for
|
||||
# AlwaysOpen = no; # Not sure what this is for
|
||||
# Maximum Concurrent Jobs = 5 # Can do 5 jobs at once? (not sure how but ok)
|
||||
#}
|
||||
|
||||
Messages { # Place to send messages
|
||||
Name = Standard # Send standard messag es
|
||||
director = bacula-dir = all # Forward those to the director
|
||||
}
|
||||
|
|
@ -1,335 +0,0 @@
|
|||
#
|
||||
# Default Bacula Storage Daemon Configuration file
|
||||
#
|
||||
# For Bacula release 9.4.2 (04 February 2019) -- ubuntu 20.04
|
||||
#
|
||||
# You may need to change the name of your tape drive
|
||||
# on the "Archive Device" directive in the Device
|
||||
# resource. If you change the Name and/or the
|
||||
# "Media Type" in the Device resource, please ensure
|
||||
# that dird.conf has corresponding changes.
|
||||
#
|
||||
#
|
||||
# Copyright (C) 2000-2017 Kern Sibbald
|
||||
# License: BSD 2-Clause; see file LICENSE-FOSS
|
||||
#
|
||||
|
||||
Storage { # definition of myself
|
||||
Name = bacula-sd
|
||||
SDPort = 9103 # Director's port
|
||||
WorkingDirectory = "/var/lib/bacula"
|
||||
Pid Directory = "/run/bacula"
|
||||
Plugin Directory = "/usr/lib/bacula"
|
||||
Maximum Concurrent Jobs = 20
|
||||
SDAddress = 127.0.0.1
|
||||
}
|
||||
|
||||
#
|
||||
# List Directors who are permitted to contact Storage daemon
|
||||
#
|
||||
Director {
|
||||
Name = bacula-dir
|
||||
Password = "wyHyTtf3Q5Mul8VvNNtm9D2lsIg2mKBVh"
|
||||
}
|
||||
|
||||
#
|
||||
# Restricted Director, used by tray-monitor to get the
|
||||
# status of the storage daemon
|
||||
#
|
||||
Director {
|
||||
Name = bacula-mon
|
||||
Password = "F988Q4o09gBCTwOO3hvk-DKGMtd-xKLo7"
|
||||
Monitor = yes
|
||||
}
|
||||
|
||||
#
|
||||
# Note, for a list of additional Device templates please
|
||||
# see the directory <bacula-source>/examples/devices
|
||||
# Or follow the following link:
|
||||
# http://www.bacula.org/git/cgit.cgi/bacula/tree/bacula/examples/devices?h=Branch-7.4
|
||||
#
|
||||
|
||||
#
|
||||
# Devices supported by this Storage daemon
|
||||
# To connect, the Director's bacula-dir.conf must have the
|
||||
# same Name and MediaType.
|
||||
#
|
||||
|
||||
#
|
||||
# Define a Virtual autochanger
|
||||
#
|
||||
Autochanger {
|
||||
Name = FileChgr1
|
||||
Device = FileChgr1-Dev1, FileChgr1-Dev2
|
||||
Changer Command = ""
|
||||
Changer Device = /dev/null
|
||||
}
|
||||
|
||||
Device {
|
||||
Name = FileChgr1-Dev1
|
||||
Media Type = File1
|
||||
Archive Device = /nonexistant/path/to/file/archive/dir
|
||||
LabelMedia = yes; # lets Bacula label unlabeled media
|
||||
Random Access = Yes;
|
||||
AutomaticMount = yes; # when device opened, read it
|
||||
RemovableMedia = no;
|
||||
AlwaysOpen = no;
|
||||
Maximum Concurrent Jobs = 5
|
||||
}
|
||||
|
||||
Device {
|
||||
Name = FileChgr1-Dev2
|
||||
Media Type = File1
|
||||
Archive Device = /nonexistant/path/to/file/archive/dir
|
||||
LabelMedia = yes; # lets Bacula label unlabeled media
|
||||
Random Access = Yes;
|
||||
AutomaticMount = yes; # when device opened, read it
|
||||
RemovableMedia = no;
|
||||
AlwaysOpen = no;
|
||||
Maximum Concurrent Jobs = 5
|
||||
}
|
||||
|
||||
#
|
||||
# Define a second Virtual autochanger
|
||||
#
|
||||
Autochanger {
|
||||
Name = FileChgr2
|
||||
Device = FileChgr2-Dev1, FileChgr2-Dev2
|
||||
Changer Command = ""
|
||||
Changer Device = /dev/null
|
||||
}
|
||||
|
||||
Device {
|
||||
Name = FileChgr2-Dev1
|
||||
Media Type = File2
|
||||
Archive Device = /nonexistant/path/to/file/archive/dir
|
||||
LabelMedia = yes; # lets Bacula label unlabeled media
|
||||
Random Access = Yes;
|
||||
AutomaticMount = yes; # when device opened, read it
|
||||
RemovableMedia = no;
|
||||
AlwaysOpen = no;
|
||||
Maximum Concurrent Jobs = 5
|
||||
}
|
||||
|
||||
Device {
|
||||
Name = FileChgr2-Dev2
|
||||
Media Type = File2
|
||||
Archive Device = /nonexistant/path/to/file/archive/dir
|
||||
LabelMedia = yes; # lets Bacula label unlabeled media
|
||||
Random Access = Yes;
|
||||
AutomaticMount = yes; # when device opened, read it
|
||||
RemovableMedia = no;
|
||||
AlwaysOpen = no;
|
||||
Maximum Concurrent Jobs = 5
|
||||
}
|
||||
|
||||
|
||||
|
||||
#
|
||||
# An autochanger device with two drives
|
||||
#
|
||||
#Autochanger {
|
||||
# Name = Autochanger
|
||||
# Device = Drive-1
|
||||
# Device = Drive-2
|
||||
# Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
|
||||
# Changer Device = /dev/sg0
|
||||
#}
|
||||
|
||||
#Device {
|
||||
# Name = Drive-1 #
|
||||
# Drive Index = 0
|
||||
# Media Type = DLT-8000
|
||||
# Archive Device = /dev/nst0
|
||||
# AutomaticMount = yes; # when device opened, read it
|
||||
# AlwaysOpen = yes;
|
||||
# RemovableMedia = yes;
|
||||
# RandomAccess = no;
|
||||
# AutoChanger = yes
|
||||
# #
|
||||
# # New alert command in Bacula 9.0.0
|
||||
# # Note: you must have the sg3_utils (rpms) or the
|
||||
# # sg3-utils (deb) installed on your system.
|
||||
# # and you must set the correct control device that
|
||||
# # corresponds to the Archive Device
|
||||
# Control Device = /dev/sg?? # must be SCSI ctl for /dev/nst0
|
||||
# Alert Command = "/etc/bacula/scripts/tapealert %l"
|
||||
#
|
||||
# #
|
||||
# # Enable the Alert command only if you have the mtx package loaded
|
||||
# # Note, apparently on some systems, tapeinfo resets the SCSI controller
|
||||
# # thus if you turn this on, make sure it does not reset your SCSI
|
||||
# # controller. I have never had any problems, and smartctl does
|
||||
# # not seem to cause such problems.
|
||||
# #
|
||||
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
|
||||
# If you have smartctl, enable this, it has more info than tapeinfo
|
||||
# Alert Command = "sh -c 'smartctl -H -l error %c'"
|
||||
#}
|
||||
|
||||
#Device {
|
||||
# Name = Drive-2 #
|
||||
# Drive Index = 1
|
||||
# Media Type = DLT-8000
|
||||
# Archive Device = /dev/nst1
|
||||
# AutomaticMount = yes; # when device opened, read it
|
||||
# AlwaysOpen = yes;
|
||||
# RemovableMedia = yes;
|
||||
# RandomAccess = no;
|
||||
# AutoChanger = yes
|
||||
# # Enable the Alert command only if you have the mtx package loaded
|
||||
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
|
||||
# If you have smartctl, enable this, it has more info than tapeinfo
|
||||
# Alert Command = "sh -c 'smartctl -H -l error %c'"
|
||||
#}
|
||||
|
||||
#
|
||||
# A Linux or Solaris LTO-2 tape drive
|
||||
#
|
||||
#Device {
|
||||
# Name = LTO-2
|
||||
# Media Type = LTO-2
|
||||
# Archive Device = /dev/nst0
|
||||
# AutomaticMount = yes; # when device opened, read it
|
||||
# AlwaysOpen = yes;
|
||||
# RemovableMedia = yes;
|
||||
# RandomAccess = no;
|
||||
# Maximum File Size = 3GB
|
||||
## Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
|
||||
## Changer Device = /dev/sg0
|
||||
## AutoChanger = yes
|
||||
# # Enable the Alert command only if you have the mtx package loaded
|
||||
## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
|
||||
## If you have smartctl, enable this, it has more info than tapeinfo
|
||||
## Alert Command = "sh -c 'smartctl -H -l error %c'"
|
||||
#}
|
||||
|
||||
#
|
||||
# A Linux or Solaris LTO-3 tape drive
|
||||
#
|
||||
#Device {
|
||||
# Name = LTO-3
|
||||
# Media Type = LTO-3
|
||||
# Archive Device = /dev/nst0
|
||||
# AutomaticMount = yes; # when device opened, read it
|
||||
# AlwaysOpen = yes;
|
||||
# RemovableMedia = yes;
|
||||
# RandomAccess = no;
|
||||
# Maximum File Size = 4GB
|
||||
# Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
|
||||
# Changer Device = /dev/sg0
|
||||
# AutoChanger = yes
|
||||
# #
|
||||
# # New alert command in Bacula 9.0.0
|
||||
# # Note: you must have the sg3_utils (rpms) or the
|
||||
# # sg3-utils (deb) installed on your system.
|
||||
# # and you must set the correct control device that
|
||||
# # corresponds to the Archive Device
|
||||
# Control Device = /dev/sg?? # must be SCSI ctl for /dev/nst0
|
||||
# Alert Command = "/etc/bacula/scripts/tapealert %l"
|
||||
#
|
||||
# # Enable the Alert command only if you have the mtx package loaded
|
||||
## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
|
||||
## If you have smartctl, enable this, it has more info than tapeinfo
|
||||
## Alert Command = "sh -c 'smartctl -H -l error %c'"
|
||||
#}
|
||||
|
||||
#
|
||||
# A Linux or Solaris LTO-4 tape drive
|
||||
#
|
||||
#Device {
|
||||
# Name = LTO-4
|
||||
# Media Type = LTO-4
|
||||
# Archive Device = /dev/nst0
|
||||
# AutomaticMount = yes; # when device opened, read it
|
||||
# AlwaysOpen = yes;
|
||||
# RemovableMedia = yes;
|
||||
# RandomAccess = no;
|
||||
# Maximum File Size = 5GB
|
||||
# Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
|
||||
# Changer Device = /dev/sg0
|
||||
# AutoChanger = yes
|
||||
# #
|
||||
# # New alert command in Bacula 9.0.0
|
||||
# # Note: you must have the sg3_utils (rpms) or the
|
||||
# # sg3-utils (deb) installed on your system.
|
||||
# # and you must set the correct control device that
|
||||
# # corresponds to the Archive Device
|
||||
# Control Device = /dev/sg?? # must be SCSI ctl for /dev/nst0
|
||||
# Alert Command = "/etc/bacula/scripts/tapealert %l"
|
||||
#
|
||||
# # Enable the Alert command only if you have the mtx package loaded
|
||||
## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
|
||||
## If you have smartctl, enable this, it has more info than tapeinfo
|
||||
## Alert Command = "sh -c 'smartctl -H -l error %c'"
|
||||
#}
|
||||
|
||||
#
|
||||
# An HP-UX tape drive
|
||||
#
|
||||
#Device {
|
||||
# Name = Drive-1 #
|
||||
# Drive Index = 0
|
||||
# Media Type = DLT-8000
|
||||
# Archive Device = /dev/rmt/1mnb
|
||||
# AutomaticMount = yes; # when device opened, read it
|
||||
# AlwaysOpen = yes;
|
||||
# RemovableMedia = yes;
|
||||
# RandomAccess = no;
|
||||
# AutoChanger = no
|
||||
# Two EOF = yes
|
||||
# Hardware End of Medium = no
|
||||
# Fast Forward Space File = no
|
||||
# #
|
||||
# # New alert command in Bacula 9.0.0
|
||||
# # Note: you must have the sg3_utils (rpms) or the
|
||||
# # sg3-utils (deb) installed on your system.
|
||||
# # and you must set the correct control device that
|
||||
# # corresponds to the Archive Device
|
||||
# Control Device = /dev/sg?? # must be SCSI ctl for /dev/rmt/1mnb
|
||||
# Alert Command = "/etc/bacula/scripts/tapealert %l"
|
||||
#
|
||||
# #
|
||||
# # Enable the Alert command only if you have the mtx package loaded
|
||||
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
|
||||
# If you have smartctl, enable this, it has more info than tapeinfo
|
||||
# Alert Command = "sh -c 'smartctl -H -l error %c'"
|
||||
#}
|
||||
|
||||
#
|
||||
# A FreeBSD tape drive
|
||||
#
|
||||
#Device {
|
||||
# Name = DDS-4
|
||||
# Description = "DDS-4 for FreeBSD"
|
||||
# Media Type = DDS-4
|
||||
# Archive Device = /dev/nsa1
|
||||
# AutomaticMount = yes; # when device opened, read it
|
||||
# AlwaysOpen = yes
|
||||
# Offline On Unmount = no
|
||||
# Hardware End of Medium = no
|
||||
# BSF at EOM = yes
|
||||
# Backward Space Record = no
|
||||
# Fast Forward Space File = no
|
||||
# TWO EOF = yes
|
||||
# #
|
||||
# # New alert command in Bacula 9.0.0
|
||||
# # Note: you must have the sg3_utils (rpms) or the
|
||||
# # sg3-utils (deb) installed on your system.
|
||||
# # and you must set the correct control device that
|
||||
# # corresponds to the Archive Device
|
||||
# Control Device = /dev/sg?? # must be SCSI ctl for /dev/nsa1
|
||||
# Alert Command = "/etc/bacula/scripts/tapealert %l"
|
||||
#
|
||||
# If you have smartctl, enable this, it has more info than tapeinfo
|
||||
# Alert Command = "sh -c 'smartctl -H -l error %c'"
|
||||
#}
|
||||
|
||||
#
|
||||
# Send all messages to the Director,
|
||||
# mount messages also are sent to the email address
|
||||
#
|
||||
Messages {
|
||||
Name = Standard
|
||||
director = bacula-dir = all
|
||||
}
|
||||
|
|
@ -33,6 +33,9 @@ Job {
|
|||
Schedule = EveryTwoDays
|
||||
Messages = JoesMail
|
||||
|
||||
Spool Data = yes # Spool data or dont on the sd
|
||||
SpoolSize = 10737418240
|
||||
|
||||
Reschedule Interval = 12 hours
|
||||
Reschedule On Error = yes
|
||||
Reschedule Times = 3
|
||||
|
|
|
|||
|
|
@ -2,72 +2,34 @@
|
|||
|
||||
Job { # Archive Obelisk
|
||||
Name = "Archive-Obelisk"
|
||||
Client = Zinc-Client
|
||||
Type = "Backup"
|
||||
JobDefs = "Default-Archive-Job"
|
||||
FileSet = "Obelisk Archive"
|
||||
Storage = Iron-Autochanger
|
||||
Messages = JoesMail
|
||||
|
||||
Pool = Archive-Pool # required parameter for all Jobs, despite what appears in the next few lines
|
||||
|
||||
Full Backup Pool = Archive-Pool
|
||||
Incremental Backup Pool = Archive-Pool
|
||||
}
|
||||
|
||||
Job { # Archive Magnesium
|
||||
Name = "Archive-Magnesium"
|
||||
Client = Zinc-Client
|
||||
Type = "Backup"
|
||||
JobDefs = "Default-Archive-Job"
|
||||
FileSet = "Magnesium Archive"
|
||||
Storage = Iron-Autochanger
|
||||
Messages = JoesMail
|
||||
|
||||
Pool = Archive-Pool # required parameter for all Jobs, despite what appears in the next few lines
|
||||
|
||||
Full Backup Pool = Archive-Pool
|
||||
Incremental Backup Pool = Archive-Pool
|
||||
}
|
||||
|
||||
|
||||
# Users go here
|
||||
Job { # Archive Travis
|
||||
Name = "Archive-Travis"
|
||||
Client = Zinc-Client
|
||||
Type = "Backup"
|
||||
JobDefs = "Default-Archive-Job"
|
||||
FileSet = "Travis Backup"
|
||||
Storage = Iron-Autochanger
|
||||
Messages = TravissMail
|
||||
|
||||
Pool = Archive-Pool # required parameter for all Jobs, despite what appears in the next few lines
|
||||
|
||||
Full Backup Pool = Archive-Pool
|
||||
Incremental Backup Pool = Archive-Pool
|
||||
}
|
||||
|
||||
Job { # Archive Zach
|
||||
Name = "Archive-Zach"
|
||||
Client = Zinc-Client
|
||||
Type = "Backup"
|
||||
JobDefs = "Default-Archive-Job"
|
||||
FileSet = "Zach Backup"
|
||||
Storage = Iron-Autochanger
|
||||
Messages = ZachsMail
|
||||
|
||||
Pool = Archive-Pool # required parameter for all Jobs, despite what appears in the next few lines
|
||||
|
||||
Full Backup Pool = Archive-Pool
|
||||
Incremental Backup Pool = Archive-Pool
|
||||
}
|
||||
|
||||
Job { # Archive Caleb
|
||||
Name = "Archive-Caleb"
|
||||
Client = Zinc-Client
|
||||
Type = "Backup"
|
||||
JobDefs = "Default-Archive-Job"
|
||||
FileSet = "Caleb Backup"
|
||||
Storage = Iron-Autochanger
|
||||
Messages = CalebsMail
|
||||
|
||||
Pool = Archive-Pool # required parameter for all Jobs, despite what appears in the next few lines
|
||||
|
||||
Full Backup Pool = Archive-Pool
|
||||
Incremental Backup Pool = Archive-Pool
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,15 +0,0 @@
|
|||
# These are jobs run for vms, storage, archive, etc
|
||||
|
||||
Job { # Archive Obelisk
|
||||
Name = "Archive-Obelisk"
|
||||
Client = Zinc-Client
|
||||
Type = "Backup"
|
||||
FileSet = "Obelisk Archive"
|
||||
Storage = Iron-Autochanger
|
||||
Messages = JoesMail
|
||||
|
||||
Pool = Archive-Pool # required parameter for all Jobs, despite what appears in the next few lines
|
||||
|
||||
Full Backup Pool = Archive-Pool
|
||||
Incremental Backup Pool = Archive-Pool
|
||||
}
|
||||
|
|
@ -2,20 +2,13 @@
|
|||
|
||||
Job { # Backup Proxmox VZdumps
|
||||
Name = "Backup-Proxmox"
|
||||
Client = Zinc-Client
|
||||
Type = "Backup"
|
||||
JobDefs = "Default-System-Job"
|
||||
FileSet = "Proxmox Backups"
|
||||
Storage = Iron-Autochanger
|
||||
Schedule = EveryTwoDays
|
||||
Messages = JoesMail
|
||||
|
||||
Reschedule Interval = 12 hours
|
||||
Reschedule On Error = yes
|
||||
Reschedule Times = 3
|
||||
|
||||
Pool = Full-Pool # required parameter for all Jobs, despite what appears in the next few lines
|
||||
|
||||
Full Backup Pool = Full-Pool
|
||||
Differential Backup Pool = Diff-Pool
|
||||
Incremental Backup Pool = Incr-Pool
|
||||
}
|
||||
|
||||
Job { # Backup Robotics Team's Files
|
||||
Name = "Backup-Robotics"
|
||||
JobDefs = "Default-System-Job"
|
||||
FileSet = "Google-Drive Robotics"
|
||||
Messages = RoboticsMail
|
||||
}
|
||||
|
|
@ -4,6 +4,7 @@ Job { # Caleb's Job
|
|||
Name = "Backup-Caleb"
|
||||
JobDefs = "Default-User-Job"
|
||||
FileSet = "Caleb Backup"
|
||||
Schedule = Never
|
||||
}
|
||||
|
||||
Job { # Mark's Job
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@ Client {
|
|||
AutoPrune = yes # Prune expired Jobs/Files
|
||||
}
|
||||
|
||||
JobDefs { # Default Job
|
||||
JobDefs { # Default User Job
|
||||
Name = "Default-User-Job"
|
||||
Client = Zinc-Client
|
||||
Type = "Backup"
|
||||
|
|
@ -20,6 +20,9 @@ JobDefs { # Default Job
|
|||
Storage = Iron-Autochanger
|
||||
Schedule = EveryTwoDays
|
||||
Messages = JoesMail
|
||||
|
||||
Spool Data = yes # Spool data or dont on the sd
|
||||
SpoolSize = 10737418240
|
||||
|
||||
Reschedule Interval = 12 hours
|
||||
Reschedule On Error = yes
|
||||
|
|
@ -31,3 +34,43 @@ JobDefs { # Default Job
|
|||
Differential Backup Pool = Diff-Pool
|
||||
Incremental Backup Pool = Incr-Pool
|
||||
}
|
||||
|
||||
JobDefs { # Default Archive Job
|
||||
Name = "Default-Archive-Job"
|
||||
Client = Zinc-Client
|
||||
Type = "Backup"
|
||||
FileSet = "Catalog"
|
||||
Storage = Iron-Autochanger
|
||||
Messages = JoesMail
|
||||
|
||||
Spool Data = yes # Spool data or dont on the sd
|
||||
SpoolSize = 10737418240
|
||||
|
||||
Pool = Archive-Pool # required parameter for all Jobs, despite what appears in the next few lines
|
||||
|
||||
Full Backup Pool = Archive-Pool
|
||||
Incremental Backup Pool = Archive-Pool
|
||||
}
|
||||
|
||||
JobDefs { # Default System Job
|
||||
Name = "Default-System-Job"
|
||||
Client = Zinc-Client
|
||||
Type = "Backup"
|
||||
FileSet = "Catalog"
|
||||
Storage = Iron-Autochanger
|
||||
Schedule = EveryTwoDays
|
||||
Messages = JoesMail
|
||||
|
||||
Spool Data = yes # Spool data or dont on the sd
|
||||
SpoolSize = 16106127360
|
||||
|
||||
Reschedule Interval = 12 hours
|
||||
Reschedule On Error = yes
|
||||
Reschedule Times = 3
|
||||
|
||||
Pool = Full-Pool # required parameter for all Jobs, despite what appears in the next few lines
|
||||
|
||||
Full Backup Pool = Full-Pool
|
||||
Differential Backup Pool = Diff-Pool
|
||||
Incremental Backup Pool = Incr-Pool
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,12 +0,0 @@
|
|||
#
|
||||
# This file has been autogenerated during package installation and
|
||||
# holds defaults for new Bacula packages installed on this system. It
|
||||
# is used only when you install a new Bacula package, and can be
|
||||
# safely removed at any time.
|
||||
|
||||
DIRPASSWD=p2ee6NtCH6Y-mw3bVk5yGgo1wjXnyne4a
|
||||
DIRMPASSWD=qh2ITlwo3xfTzP8uxwJjq1vJshc1Dsimc
|
||||
SDPASSWD=wyHyTtf3Q5Mul8VvNNtm9D2lsIg2mKBVh
|
||||
SDMPASSWD=F988Q4o09gBCTwOO3hvk-DKGMtd-xKLo7
|
||||
FDPASSWD=plfcG_XSfD6EBSD0YQhZThlZNHFFFjqtg
|
||||
FDMPASSWD=ULdl26830u9xQw1i8YI_VBqaIMG1OfE_V
|
||||
|
|
@ -1,100 +0,0 @@
|
|||
# Bacula config Backup
|
||||
FileSet {
|
||||
Name = "MyFirstFileSet"
|
||||
Include {
|
||||
Options {
|
||||
signature=MD5
|
||||
}
|
||||
File = /etc/bacula/
|
||||
}
|
||||
Exclude {
|
||||
File = *~
|
||||
}
|
||||
}
|
||||
|
||||
# This is the backup of the catalog
|
||||
FileSet {
|
||||
Name = "Catalog"
|
||||
Include {
|
||||
Options {
|
||||
signature = MD5
|
||||
}
|
||||
File = "/var/lib/postgresql/12/main"
|
||||
}
|
||||
}
|
||||
|
||||
# Caleb's backup on zinc
|
||||
FileSet {
|
||||
Name = "Caleb Backup"
|
||||
Include {
|
||||
Options {
|
||||
signature = MD5
|
||||
compression=GZIP
|
||||
}
|
||||
File = "/mnt/Caleb/"
|
||||
}
|
||||
}
|
||||
|
||||
# Mark's backup on zinc
|
||||
FileSet {
|
||||
Name = "Mark Backup"
|
||||
Include {
|
||||
Options {
|
||||
signature = MD5
|
||||
compression=GZIP
|
||||
}
|
||||
File = "/mnt/Mark/"
|
||||
#File = "/mnt/NextCloud/data/mark/"
|
||||
}
|
||||
}
|
||||
|
||||
# Joe's backup on zinc
|
||||
FileSet {
|
||||
Name = "Joe Backup"
|
||||
Include {
|
||||
Options {
|
||||
signature = MD5
|
||||
compression=GZIP
|
||||
}
|
||||
File = "/mnt/Joe/"
|
||||
File = "/mnt/NextCloud/data/joe/"
|
||||
}
|
||||
}
|
||||
|
||||
# Matthew's backup on zinc
|
||||
FileSet {
|
||||
Name = "Matthew Backup"
|
||||
Include {
|
||||
Options {
|
||||
signature = MD5
|
||||
compression=GZIP
|
||||
}
|
||||
File = "/mnt/Matthew/"
|
||||
#File = "/mnt/NextCloud/data/matthew/"
|
||||
}
|
||||
}
|
||||
|
||||
# Michael's backup on zinc
|
||||
FileSet {
|
||||
Name = "Michael Backup"
|
||||
Include {
|
||||
Options {
|
||||
signature = MD5
|
||||
compression=GZIP
|
||||
}
|
||||
File = "/mnt/Michael/"
|
||||
#File = "/mnt/NextCloud/data/michael/"
|
||||
}
|
||||
}
|
||||
|
||||
# Archive for Obelisk
|
||||
FileSet {
|
||||
Name = "Obelisk Archive"
|
||||
Include {
|
||||
Options {
|
||||
signature = MD5
|
||||
compression=GZIP
|
||||
}
|
||||
File = "/mnt/Obelisk/"
|
||||
}
|
||||
}
|
||||
|
|
@ -33,3 +33,15 @@ FileSet {
|
|||
File = "/mnt/Proxmox/"
|
||||
}
|
||||
}
|
||||
|
||||
# Backup 1721's Google Drives
|
||||
FileSet {
|
||||
Name = "Google-Drive Robotics"
|
||||
Include {
|
||||
Options {
|
||||
signature = MD5
|
||||
}
|
||||
File = "/mnt/1721_Drive/"
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -42,3 +42,7 @@ Schedule {
|
|||
|
||||
#Run = Level=Incremental sat tue at 2:30
|
||||
}
|
||||
|
||||
Schedule {
|
||||
Name = Never
|
||||
}
|
||||
|
|
@ -0,0 +1,22 @@
|
|||
from discord_webhook import DiscordWebhook, DiscordEmbed
|
||||
|
||||
webhookURL = "https://discordapp.com/api/webhooks/742784012640190565/NBhtbWpDdgMZPx7uCXO8Ofw-o8Lez0V17EBGIvYv7FTIeTENK24GHNL3krUbYnOOIJ63"
|
||||
maxCharPerMessage = 1994
|
||||
|
||||
with open ("/etc/bacula/scripts/webhooks/ChrisProEliteMail.md", "r") as myfile:
|
||||
cleaned_stdout=myfile.read()
|
||||
|
||||
if "Termination: Backup OK" in cleaned_stdout:
|
||||
truncated_stdout = ["Job Backup-Chris completed with status Backup OK, omitting full report.\nAll data from nextcloud was successfully written to tape on " + datetime.now().strftime("%d/%m/%Y %H:%M:%S") + "."]
|
||||
else:
|
||||
# Discord limits each message to 2000 chars, if the message is longer than that, truncate it
|
||||
truncated_stdout = [cleaned_stdout[i:i+maxCharPerMessage] for i in range(0, len(cleaned_stdout), maxCharPerMessage)]
|
||||
|
||||
print (truncated_stdout) # Print the truncated message
|
||||
|
||||
|
||||
for message_part in truncated_stdout: # For every message part in the truncated output, run this loop
|
||||
message_part = "```" + message_part + "```" # Encapsulate the messsage
|
||||
print(message_part)
|
||||
webhook = DiscordWebhook(url=webhookURL, content=message_part) # Attach the message
|
||||
response = webhook.execute() # Hit send
|
||||
|
|
@ -0,0 +1,52 @@
|
|||
11-Aug 12:41 bacula-dir JobId 310: Start Backup JobId 310, Job=Backup-Chris.2020-08-11_12.41.09_06
|
||||
11-Aug 12:41 bacula-dir JobId 310: Using Device "Drive-1-LTO-3" to write.
|
||||
11-Aug 12:41 bacula-iron-sd JobId 310: 3304 Issuing autochanger "load Volume PF6866, Slot 7, Drive 1" command.
|
||||
11-Aug 12:41 bacula-iron-sd JobId 310: 3305 Autochanger "load Volume PF6866, Slot 7, Drive 1", status is OK.
|
||||
11-Aug 12:41 bacula-iron-sd JobId 310: Volume "PF6866" previously written, moving to end of data.
|
||||
11-Aug 12:42 bacula-iron-sd JobId 310: Ready to append to end of Volume "PF6866" at file=76.
|
||||
11-Aug 12:42 bacula-iron-sd JobId 310: Spooling data ...
|
||||
11-Aug 12:42 bacula-iron-sd JobId 310: Committing spooled data to Volume "PF6866". Despooling 430 bytes ...
|
||||
11-Aug 12:42 bacula-iron-sd JobId 310: Despooling elapsed time = 00:00:01, Transfer rate = 430 Bytes/second
|
||||
11-Aug 12:42 bacula-iron-sd JobId 310: Elapsed time=00:00:01, Transfer rate=0 Bytes/second
|
||||
11-Aug 12:43 bacula-iron-sd JobId 310: Sending spooled attrs to the Director. Despooling 0 bytes ...
|
||||
11-Aug 12:43 bacula-dir JobId 310: Bacula bacula-dir 9.4.2 (04Feb19):
|
||||
Build OS: x86_64-pc-linux-gnu ubuntu 20.04
|
||||
JobId: 310
|
||||
Job: Backup-Chris.2020-08-11_12.41.09_06
|
||||
Backup Level: Incremental, since=2020-08-11 02:29:34
|
||||
Client: "Zinc-Client" 9.6.3 (09Mar20) amd64-portbld-freebsd11.3,freebsd,11.3-RELEASE-p8
|
||||
FileSet: "Chris Backup" 2020-06-23 16:46:12
|
||||
Pool: "Incr-Pool" (From Job IncPool override)
|
||||
Catalog: "MyCatalog" (From Client resource)
|
||||
Storage: "Iron-Autochanger" (From Pool resource)
|
||||
Scheduled time: 11-Aug-2020 12:41:08
|
||||
Start time: 11-Aug-2020 12:41:12
|
||||
End time: 11-Aug-2020 12:43:00
|
||||
Elapsed time: 1 min 48 secs
|
||||
Priority: 10
|
||||
FD Files Written: 0
|
||||
SD Files Written: 0
|
||||
FD Bytes Written: 0 (0 B)
|
||||
SD Bytes Written: 0 (0 B)
|
||||
Rate: 0.0 KB/s
|
||||
Software Compression: None
|
||||
Comm Line Compression: None
|
||||
Snapshot/VSS: no
|
||||
Encryption: no
|
||||
Accurate: no
|
||||
Volume name(s):
|
||||
Volume Session Id: 13
|
||||
Volume Session Time: 1596908811
|
||||
Last Volume Bytes: 239,752,719,360 (239.7 GB)
|
||||
Non-fatal FD errors: 0
|
||||
SD Errors: 0
|
||||
FD termination status: OK
|
||||
SD termination status: OK
|
||||
Termination: Backup OK
|
||||
|
||||
11-Aug 12:43 bacula-dir JobId 310: Begin pruning Jobs older than 30 years .
|
||||
11-Aug 12:43 bacula-dir JobId 310: No Jobs found to prune.
|
||||
11-Aug 12:43 bacula-dir JobId 310: Begin pruning Files.
|
||||
11-Aug 12:43 bacula-dir JobId 310: No Files found to prune.
|
||||
11-Aug 12:43 bacula-dir JobId 310: End auto prune.
|
||||
|
||||
|
|
@ -0,0 +1,23 @@
|
|||
from discord_webhook import DiscordWebhook, DiscordEmbed
|
||||
from datetime import datetime
|
||||
|
||||
webhookURL = "https://discordapp.com/api/webhooks/740630755259973713/CNhxPBJ4C6UZ-m1DVXUQ54KeJQD3I9Di0sAwldmyjw-s7dMPUWplq7rhGXegpWGtKSve"
|
||||
maxCharPerMessage = 1994
|
||||
|
||||
with open ("/etc/bacula/scripts/webhooks/RoboticsMail.md", "r") as myfile:
|
||||
cleaned_stdout=myfile.read()
|
||||
|
||||
if "Termination: Backup OK" in cleaned_stdout:
|
||||
truncated_stdout = ["Job Backup-Robotics completed with status Backup OK, omitting full report.\nAll data from google drive was successfully written to tape on " + datetime.now().strftime("%d/%m/%Y %H:%M:%S") + "."]
|
||||
else:
|
||||
# Discord limits each message to 2000 chars, if the message is longer than that, truncate it
|
||||
truncated_stdout = [cleaned_stdout[i:i+maxCharPerMessage] for i in range(0, len(cleaned_stdout), maxCharPerMessage)]
|
||||
|
||||
print (truncated_stdout) # Print the truncated message
|
||||
|
||||
|
||||
for message_part in truncated_stdout: # For every message part in the truncated output, run this loop
|
||||
message_part = "```" + message_part + "```" # Encapsulate the messsage
|
||||
print(message_part)
|
||||
webhook = DiscordWebhook(url=webhookURL, content=message_part) # Attach the message
|
||||
response = webhook.execute() # Hit send
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
11-Aug 02:56 bacula-dir JobId 308: Start Backup JobId 308, Job=Backup-Robotics.2020-08-11_02.15.00_10
|
||||
11-Aug 02:56 bacula-dir JobId 308: Using Device "Drive-1-LTO-3" to write.
|
||||
11-Aug 02:56 bacula-iron-sd JobId 308: Spooling data ...
|
||||
11-Aug 02:56 bacula-iron-sd JobId 308: Committing spooled data to Volume "PF6866". Despooling 788,279,412 bytes ...
|
||||
11-Aug 02:56 bacula-iron-sd JobId 308: Despooling elapsed time = 00:00:12, Transfer rate = 65.68 M Bytes/second
|
||||
11-Aug 02:56 bacula-iron-sd JobId 308: Elapsed time=00:00:27, Transfer rate=29.16 M Bytes/second
|
||||
11-Aug 02:56 bacula-iron-sd JobId 308: Sending spooled attrs to the Director. Despooling 24,152 bytes ...
|
||||
11-Aug 02:56 bacula-dir JobId 308: Bacula bacula-dir 9.4.2 (04Feb19):
|
||||
Build OS: x86_64-pc-linux-gnu ubuntu 20.04
|
||||
JobId: 308
|
||||
Job: Backup-Robotics.2020-08-11_02.15.00_10
|
||||
Backup Level: Incremental, since=2020-08-07 15:31:45
|
||||
Client: "Zinc-Client" 9.6.3 (09Mar20) amd64-portbld-freebsd11.3,freebsd,11.3-RELEASE-p8
|
||||
FileSet: "Google-Drive Robotics" 2020-08-05 15:36:42
|
||||
Pool: "Incr-Pool" (From Job IncPool override)
|
||||
Catalog: "MyCatalog" (From Client resource)
|
||||
Storage: "Iron-Autochanger" (From Pool resource)
|
||||
Scheduled time: 11-Aug-2020 02:15:00
|
||||
Start time: 11-Aug-2020 02:56:27
|
||||
End time: 11-Aug-2020 02:56:55
|
||||
Elapsed time: 28 secs
|
||||
Priority: 10
|
||||
FD Files Written: 98
|
||||
SD Files Written: 98
|
||||
FD Bytes Written: 787,531,312 (787.5 MB)
|
||||
SD Bytes Written: 787,545,944 (787.5 MB)
|
||||
Rate: 28126.1 KB/s
|
||||
Software Compression: None
|
||||
Comm Line Compression: 1.2% 1.0:1
|
||||
Snapshot/VSS: no
|
||||
Encryption: no
|
||||
Accurate: no
|
||||
Volume name(s): PF6866
|
||||
Volume Session Id: 12
|
||||
Volume Session Time: 1596908811
|
||||
Last Volume Bytes: 239,752,654,848 (239.7 GB)
|
||||
Non-fatal FD errors: 0
|
||||
SD Errors: 0
|
||||
FD termination status: OK
|
||||
SD termination status: OK
|
||||
Termination: Backup OK
|
||||
|
||||
11-Aug 02:56 bacula-dir JobId 308: Begin pruning Jobs older than 30 years .
|
||||
11-Aug 02:56 bacula-dir JobId 308: No Jobs found to prune.
|
||||
11-Aug 02:56 bacula-dir JobId 308: Begin pruning Files.
|
||||
11-Aug 02:56 bacula-dir JobId 308: No Files found to prune.
|
||||
11-Aug 02:56 bacula-dir JobId 308: End auto prune.
|
||||
Loading…
Reference in New Issue