Add in millyard labs

Reviewed-on: https://kitsunehosting.net/gitea/Kenwood/dotfiles/pulls/2

.DOTFILES_README

@@ -1,17 +0,0 @@
-# Clone repo
-git clone --bare https://kitsunehosting.net/gitea/Kenwood/dotfiles.git $HOME/.dotfiles
-
-# Make a temp alias (will be perminant via .zshrc)
-alias config='/usr/bin/git --git-dir=$HOME/.dotfiles/ --work-tree=$HOME'
-
-# Pull stuff down!
-config checkout
-
-# If things offend, backup or delete existing/differeing files.
-# This could work but idk
-mkdir -p .config-backup && \
-config checkout 2>&1 | egrep "\s+\." | awk {'print $1'} | \
-xargs -I{} mv {} .config-backup/{}
-
-# Also use this to keep it all neat!
-config config --local status.showUntrackedFiles no

.FreeCAD/Macro/DisableDominantMode.FCMacro

@@ -0,0 +1,8 @@
+# -*- coding: utf-8 -*-
+
+# Macro Begin: /home/joe/.FreeCAD/Macro/DisableDominantMode.FCMacro +++++++++++++++++++++++++++++++++++++++++++++++++
+import FreeCAD
+
+# Gui.runCommand('Std_DlgMacroRecord',0)
+# Gui.runCommand('Std_DlgCustomize',0)
+# Macro End: /home/joe/.FreeCAD/Macro/DisableDominantMode.FCMacro +++++++++++++++++++++++++++++++++++++++++++++++++

.FreeCAD/Macro/EnableDominantMode.FCMacro

@@ -0,0 +1,8 @@
+# -*- coding: utf-8 -*-
+
+# Macro Begin: /home/joe/.FreeCAD/Macro/EnableDominantMode.FCMacro +++++++++++++++++++++++++++++++++++++++++++++++++
+import FreeCAD
+
+# Gui.runCommand('Std_DlgMacroRecord',0)
+# Gui.runCommand('Std_DlgCustomize',0)
+# Macro End: /home/joe/.FreeCAD/Macro/EnableDominantMode.FCMacro +++++++++++++++++++++++++++++++++++++++++++++++++

.FreeCAD/Notes.md

@@ -0,0 +1,3 @@
+Diameter: ∅
+Depth:
+Counterbore: ⌴

.FreeCAD/toolbits/Bit/125_Drill.fctb

@@ -0,0 +1,14 @@
+{
+  "version": 2,
+  "name": "1/8th Drill Bit",
+  "shape": "drill.fcstd",
+  "parameter": {
+    "Chipload": "0.000 in",
+    "Diameter": "0.125 in",
+    "Flutes": "0",
+    "Length": "0.750 in",
+    "Material": "HSS",
+    "TipAngle": "135.000 \u00b0"
+  },
+  "attribute": {}
+}

.FreeCAD/toolbits/Bit/316_Endmill.fctb

@@ -0,0 +1,16 @@
+{
+  "version": 2,
+  "name": "3/16 Endmill",
+  "shape": "endmill.fcstd",
+  "parameter": {
+    "Chipload": "0.000 in",
+    "CuttingEdgeHeight": "0.600 \"",
+    "Diameter": "0.187 \"",
+    "Flutes": "0",
+    "Length": "1.500 \"",
+    "Material": "HSS",
+    "ShankDiameter": "0.315 \"",
+    "SpindleDirection": "Forward"
+  },
+  "attribute": {}
+}

.FreeCAD/toolbits/Bit/45degree_chamfer.fctb

@@ -0,0 +1,14 @@
+{
+  "version": 2,
+  "name": "45 Deg. Chamfer",
+  "shape": "chamfer.fcstd",
+  "parameter": {
+    "CuttingEdgeAngle": "45.0000 \u00b0",
+    "CuttingEdgeHeight": "6.3500 mm",
+    "Diameter": "12.3323 mm",
+    "Length": "30.0000 mm",
+    "ShankDiameter": "6.3500 mm",
+    "TipDiameter": "5.0000 mm"
+  },
+  "attribute": {}
+}

.FreeCAD/toolbits/Bit/5mm-thread-cutter.fctb

@@ -0,0 +1,14 @@
+{
+  "version": 2,
+  "name": "5mm-thread-cutter",
+  "shape": "thread-mill.fcstd",
+  "parameter": {
+    "Crest": "0.10 mm",
+    "Diameter": "5.00 mm",
+    "Length": "50.00 mm",
+    "NeckDiameter": "3.00 mm",
+    "NeckLength": "20.00 mm",
+    "ShankDiameter": "5.00 mm"
+  },
+  "attribute": {}
+}

.FreeCAD/toolbits/Bit/5mm_Drill.fctb

@@ -0,0 +1,11 @@
+{
+  "version": 2,
+  "name": "5mm Drill",
+  "shape": "drill.fcstd",
+  "parameter": {
+    "Diameter": "5.0000 mm",
+    "Length": "50.0000 mm",
+    "TipAngle": "119.0000 \u00b0"
+  },
+  "attribute": {}
+}

.FreeCAD/toolbits/Bit/5mm_Endmill.fctb

@@ -0,0 +1,12 @@
+{
+  "version": 2,
+  "name": "5mm Endmill",
+  "shape": "endmill.fcstd",
+  "parameter": {
+    "CuttingEdgeHeight": "30.0000 mm",
+    "Diameter": "5.0000 mm",
+    "Length": "50.0000 mm",
+    "ShankDiameter": "3.0000 mm"
+  },
+  "attribute": {}
+}

.FreeCAD/toolbits/Bit/60degree_Vbit.fctb

@@ -0,0 +1,14 @@
+{
+  "version": 2,
+  "name": "60 Deg. V-Bit",
+  "shape": "v-bit.fcstd",
+  "parameter": {
+    "CuttingEdgeAngle": "60.0000 \u00b0",
+    "Diameter": "10.0000 mm",
+    "CuttingEdgeHeight": "1.0000 mm",
+    "TipDiameter": "1.0000 mm",
+    "Length": "20.0000 mm",
+    "ShankDiameter": "5.0000 mm"
+  },
+  "attribute": {}
+}

.FreeCAD/toolbits/Bit/6mm_Ball_End.fctb

@@ -0,0 +1,12 @@
+{
+  "version": 2,
+  "name": "6mm Ball End",
+  "shape": "ballend.fcstd",
+  "parameter": {
+    "CuttingEdgeHeight": "40.0000 mm",
+    "Diameter": "6.0000 mm",
+    "Length": "50.0000 mm",
+    "ShankDiameter": "3.0000 mm"
+  },
+  "attribute": {}
+}

.FreeCAD/toolbits/Bit/6mm_Bullnose.fctb

@@ -0,0 +1,13 @@
+{
+  "version": 2,
+  "name": "6 mm Bull Nose",
+  "shape": "bullnose.fcstd",
+  "parameter": {
+    "CuttingEdgeHeight": "40.0000 mm",
+    "Diameter": "6.0000 mm",
+    "FlatRadius": "1.5000 mm",
+    "Length": "50.0000 mm",
+    "ShankDiameter": "3.0000 mm"
+  },
+  "attribute": {}
+}

.FreeCAD/toolbits/Bit/probe.fctb

@@ -0,0 +1,11 @@
+{
+  "version": 2,
+  "name": "Probe",
+  "shape": "probe.fcstd",
+  "parameter": {
+    "Diameter": "6.0000 mm",
+    "Length": "50.0000 mm",
+    "ShaftDiameter": "4.0000 mm"
+  },
+  "attribute": {}
+}

.FreeCAD/toolbits/Bit/singleFlute8th_Endmill.fctb

@@ -0,0 +1,16 @@
+{
+  "version": 2,
+  "name": "Single Flute 1/8th inch endmill",
+  "shape": "endmill.fcstd",
+  "parameter": {
+    "Chipload": "0.000 in",
+    "CuttingEdgeHeight": "0.600 \"",
+    "Diameter": "0.125 \"",
+    "Flutes": "0",
+    "Length": "1.000 \"",
+    "Material": "HSS",
+    "ShankDiameter": "0.315 \"",
+    "SpindleDirection": "Forward"
+  },
+  "attribute": {}
+}

.FreeCAD/toolbits/Bit/slittingsaw.fctb

@@ -0,0 +1,14 @@
+{
+  "version": 2,
+  "name": "Slitting Saw",
+  "shape": "slittingsaw.fcstd",
+  "parameter": {
+    "BladeThickness": "3.0000 mm",
+    "CapHeight": "3.0000 mm",
+    "CapDiameter": "8.0000 mm",
+    "Diameter": "76.2000 mm",
+    "Length": "50.0000 mm",
+    "ShankDiameter": "19.0500 mm"
+  },
+  "attribute": {}
+}

.FreeCAD/toolbits/Library/Default.fctl

@@ -0,0 +1,41 @@
+{
+  "tools": [
+    {
+      "nr": 1,
+      "path": "5mm_Endmill.fctb"
+    },
+    {
+      "nr": 2,
+      "path": "5mm_Drill.fctb"
+    },
+    {
+      "nr": 3,
+      "path": "6mm_Ball_End.fctb"
+    },
+    {
+      "nr": 4,
+      "path": "6mm_Bullnose.fctb"
+    },
+    {
+      "nr": 5,
+      "path": "60degree_Vbit.fctb"
+    },
+    {
+      "nr": 6,
+      "path": "45degree_chamfer.fctb"
+    },
+    {
+      "nr": 7,
+      "path": "slittingsaw.fctb"
+    },
+    {
+      "nr": 8,
+      "path": "probe.fctb"
+    },
+    {
+      "nr": 9,
+      "path": "5mm-thread-cutter.fctb"
+    }
+  ],
+  "version": 1
+}

.FreeCAD/toolbits/Library/Tidal Force.fctl

@@ -0,0 +1,13 @@
+{
+  "tools": [
+    {
+      "nr": 1,
+      "path": "125_Drill.fctb"
+    },
+    {
+      "nr": 2,
+      "path": "singleFlute8th_Endmill.fctb"
+    }
+  ],
+  "version": 1
+}

.FreeCAD/toolbits/README.md

@@ -0,0 +1,88 @@
+# Tools
+
+Each tool is stored as a JSON file which has the shape's path and values for all attributes of the shape.
+It also includes all additional parameters and their values.
+
+Storing a tool as a JSON file sounds great but eliminates the option of an accurate thumbnail. On the other hand,
+storing each tool as a `*.fcstd` file requires more space and does not allow for generating tools. If one has an
+extensive tool aresenal they might want to script the generation of tools which is easily done for a `*.json` file but
+practically impossible for `*.fcstd` files.
+
+When a tool is instantiated in a job the PDN body is created from the shape and the attributes and constraints are set
+according to the values from the JSON file. All additional parameters are created as properties on the object. This
+provides the correct shape and dimensions which can be used to generate a point cloud or mesh for advanced
+algorithms (and potentially simulation).
+
+# Tool Libraries
+
+Due to each tool being stored in its own file and the storage/organization of those files being quite flexible the
+importance of a tool library for organisational purposes is quite diminished. The user is free to organise their tools
+in whichever directory hierarchy they see fit and can also name them as best fits their use and organisation. A
+_tool library_ is nevertheless a great representation for a physical grouping of tools, such as in an automatic tool
+changer.
+
+A tool library is a (JSON) file with a mapping of tool id to the path of the tool file. As a consequence each tool
+can be in multiple libraries and doesn't have an `id` of it's own. The `id` is a property of the library.
+
+If a tool from a tool library (or an entire tool library) is added to a job it retains its `id` from the library as a
+property. Adding a tool bit directly rsults in the tool getting the next free id assigned.
+
+# Tool Controllers
+
+They largely stay the same as they are today. As an additional feature it should be possible to _copy_ a TC, which
+allows for easy feed/speed changes for the same tool.
+
+Above requirement highlights one change though, that the `id` should be a property of the Bit, and not of the TC.
+There are two requirements that are currently mapped to a single `id`. There needs to be an identification of which
+TC is being used by a certain op, and which tool number to use for a `M6` command.
+
+# Paths and Extensibility
+
+The following directory structure is used for supplied (shipped with FreeCAD) tools:
+```
+  Tools
+    + Bit
+    + Library
+    + Shape
+```
+
+Strictly speaking a user is free to store their tools wherever they want and however they want. By default the file
+dialog will open the corresponding directory (depending on context), or whichever directory the user opened last.
+
+Above directory structure with the most common default tools shipped with FreeCAD should be installed analogous to
+TechDraw's templates.
+
+## How to create a new tool
+
+1. Set the tool's Label, this will show up in the object tree
+1. Select a tool shape from the existing shape files. If your tool doesn't exist, you'll have to create a new shape,
+   see below for details.
+1. Each tool bit shape has its own set of parameters, fill them with the tool's values.
+1. Select additional parameters
+1. Save the tool under path/file that makes sense to you
+
+
+## How to create a new tool bit Shape
+
+The shape file for a tool bit is expected to contain a PD body which represents the tool as a 3d solid. The PD body
+should be parametric based on a PropertyBag object so that, when the properties of the PropertyBag are changed the
+solid is updated to the correct representation.
+
+1. Create a new FreeCAD document
+1. Open the `PartDesign` workbench, create a body and give the body a label you want to show up in the bit selection.
+1. Open the Path workbench and (with the PD body selected) create a PropertyBag,
+   menu 'Path' -> 'Utils' -> 'Property Bag'
+   * this creates a PropertyBag object inside the Body (assuming it was selected)
+   * add properties to which define the tool bit's shape and put those into the group 'Shape'
+   * add any other properties to the bag which might be useful for the tool bit
+1. Construct the body of the tool bit and assign expressions referencing properties from the PropertyBag (in the
+   `Shape` Group) for all constraints.
+   * Position the tip of the tool bit on the origin (0,0)
+1. Save the document as a new file in the Shape directory
+   * Before saving the document make sure you have _Save Thumbnail_ selected, and _Add program logo_ deselected in
+     FreeCAD's preferences.
+   * Also make sure to switch to _Front View_ and _Fit content to screen_
+   * Whatever you see when saving the document will end up being the visual representation of tool bits with this shape
+
+Not that 'Shape' is the only property group which has special meaning for tool bits. All other property groups are
+copied verbatim to the ToolBit object when one is created.

.config/nano/nanorc

@@ -0,0 +1 @@
+include "/usr/share/nano/*.nanorc"

.config/neofetch/config.conf

@@ -0,0 +1,864 @@
+# See this wiki page for more info:
+# https://github.com/dylanaraps/neofetch/wiki/Customizing-Info
+print_info() {
+    info title
+    info underline
+
+    info "OS" distro
+    info "Host" model
+    info "Kernel" kernel
+    info "Uptime" uptime
+    info "Packages" packages
+    info "Shell" shell
+    info "Resolution" resolution
+    info "DE" de
+    info "WM" wm
+    info "WM Theme" wm_theme
+    info "Theme" theme
+    info "Icons" icons
+    info "Terminal" term
+    info "Terminal Font" term_font
+    info "CPU" cpu
+    info "GPU" gpu
+    info "Memory" memory
+
+    info "GPU Driver" gpu_driver  # Linux/macOS only
+    # info "CPU Usage" cpu_usage
+    # info "Disk" disk
+    # info "Battery" battery
+    # info "Font" font
+    # info "Song" song
+    # [[ "$player" ]] && prin "Music Player" "$player"
+    # info "Local IP" local_ip
+    # info "Public IP" public_ip
+    # info "Users" users
+    # info "Locale" locale  # This only works on glibc systems.
+
+    info cols
+}
+
+# Title
+
+
+# Hide/Show Fully qualified domain name.
+#
+# Default:  'off'
+# Values:   'on', 'off'
+# Flag:     --title_fqdn
+title_fqdn="off"
+
+
+# Kernel
+
+
+# Shorten the output of the kernel function.
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --kernel_shorthand
+# Supports: Everything except *BSDs (except PacBSD and PC-BSD)
+#
+# Example:
+# on:  '4.8.9-1-ARCH'
+# off: 'Linux 4.8.9-1-ARCH'
+kernel_shorthand="on"
+
+
+# Distro
+
+
+# Shorten the output of the distro function
+#
+# Default:  'off'
+# Values:   'on', 'tiny', 'off'
+# Flag:     --distro_shorthand
+# Supports: Everything except Windows and Haiku
+distro_shorthand="off"
+
+# Show/Hide OS Architecture.
+# Show 'x86_64', 'x86' and etc in 'Distro:' output.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --os_arch
+#
+# Example:
+# on:  'Arch Linux x86_64'
+# off: 'Arch Linux'
+os_arch="on"
+
+
+# Uptime
+
+
+# Shorten the output of the uptime function
+#
+# Default: 'on'
+# Values:  'on', 'tiny', 'off'
+# Flag:    --uptime_shorthand
+#
+# Example:
+# on:   '2 days, 10 hours, 3 mins'
+# tiny: '2d 10h 3m'
+# off:  '2 days, 10 hours, 3 minutes'
+uptime_shorthand="on"
+
+
+# Memory
+
+
+# Show memory pecentage in output.
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --memory_percent
+#
+# Example:
+# on:   '1801MiB / 7881MiB (22%)'
+# off:  '1801MiB / 7881MiB'
+memory_percent="off"
+
+# Change memory output unit.
+#
+# Default: 'mib'
+# Values:  'kib', 'mib', 'gib'
+# Flag:    --memory_unit
+#
+# Example:
+# kib  '1020928KiB / 7117824KiB'
+# mib  '1042MiB / 6951MiB'
+# gib: ' 0.98GiB / 6.79GiB'
+memory_unit="mib"
+
+
+# Packages
+
+
+# Show/Hide Package Manager names.
+#
+# Default: 'tiny'
+# Values:  'on', 'tiny' 'off'
+# Flag:    --package_managers
+#
+# Example:
+# on:   '998 (pacman), 8 (flatpak), 4 (snap)'
+# tiny: '908 (pacman, flatpak, snap)'
+# off:  '908'
+package_managers="on"
+
+
+# Shell
+
+
+# Show the path to $SHELL
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --shell_path
+#
+# Example:
+# on:  '/bin/bash'
+# off: 'bash'
+shell_path="off"
+
+# Show $SHELL version
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --shell_version
+#
+# Example:
+# on:  'bash 4.4.5'
+# off: 'bash'
+shell_version="on"
+
+
+# CPU
+
+
+# CPU speed type
+#
+# Default: 'bios_limit'
+# Values: 'scaling_cur_freq', 'scaling_min_freq', 'scaling_max_freq', 'bios_limit'.
+# Flag:    --speed_type
+# Supports: Linux with 'cpufreq'
+# NOTE: Any file in '/sys/devices/system/cpu/cpu0/cpufreq' can be used as a value.
+speed_type="bios_limit"
+
+# CPU speed shorthand
+#
+# Default: 'off'
+# Values: 'on', 'off'.
+# Flag:    --speed_shorthand
+# NOTE: This flag is not supported in systems with CPU speed less than 1 GHz
+#
+# Example:
+# on:    'i7-6500U (4) @ 3.1GHz'
+# off:   'i7-6500U (4) @ 3.100GHz'
+speed_shorthand="off"
+
+# Enable/Disable CPU brand in output.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --cpu_brand
+#
+# Example:
+# on:   'Intel i7-6500U'
+# off:  'i7-6500U (4)'
+cpu_brand="on"
+
+# CPU Speed
+# Hide/Show CPU speed.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --cpu_speed
+#
+# Example:
+# on:  'Intel i7-6500U (4) @ 3.1GHz'
+# off: 'Intel i7-6500U (4)'
+cpu_speed="on"
+
+# CPU Cores
+# Display CPU cores in output
+#
+# Default: 'logical'
+# Values:  'logical', 'physical', 'off'
+# Flag:    --cpu_cores
+# Support: 'physical' doesn't work on BSD.
+#
+# Example:
+# logical:  'Intel i7-6500U (4) @ 3.1GHz' (All virtual cores)
+# physical: 'Intel i7-6500U (2) @ 3.1GHz' (All physical cores)
+# off:      'Intel i7-6500U @ 3.1GHz'
+cpu_cores="logical"
+
+# CPU Temperature
+# Hide/Show CPU temperature.
+# Note the temperature is added to the regular CPU function.
+#
+# Default: 'off'
+# Values:  'C', 'F', 'off'
+# Flag:    --cpu_temp
+# Supports: Linux, BSD
+# NOTE: For FreeBSD and NetBSD-based systems, you'll need to enable
+#       coretemp kernel module. This only supports newer Intel processors.
+#
+# Example:
+# C:   'Intel i7-6500U (4) @ 3.1GHz [27.2°C]'
+# F:   'Intel i7-6500U (4) @ 3.1GHz [82.0°F]'
+# off: 'Intel i7-6500U (4) @ 3.1GHz'
+cpu_temp="off"
+
+
+# GPU
+
+
+# Enable/Disable GPU Brand
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gpu_brand
+#
+# Example:
+# on:  'AMD HD 7950'
+# off: 'HD 7950'
+gpu_brand="on"
+
+# Which GPU to display
+#
+# Default: 'all'
+# Values:  'all', 'dedicated', 'integrated'
+# Flag:    --gpu_type
+# Supports: Linux
+#
+# Example:
+# all:
+#   GPU1: AMD HD 7950
+#   GPU2: Intel Integrated Graphics
+#
+# dedicated:
+#   GPU1: AMD HD 7950
+#
+# integrated:
+#   GPU1: Intel Integrated Graphics
+gpu_type="all"
+
+
+# Resolution
+
+
+# Display refresh rate next to each monitor
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --refresh_rate
+# Supports: Doesn't work on Windows.
+#
+# Example:
+# on:  '1920x1080 @ 60Hz'
+# off: '1920x1080'
+refresh_rate="off"
+
+
+# Gtk Theme / Icons / Font
+
+
+# Shorten output of GTK Theme / Icons / Font
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --gtk_shorthand
+#
+# Example:
+# on:  'Numix, Adwaita'
+# off: 'Numix [GTK2], Adwaita [GTK3]'
+gtk_shorthand="off"
+
+
+# Enable/Disable gtk2 Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gtk2
+#
+# Example:
+# on:  'Numix [GTK2], Adwaita [GTK3]'
+# off: 'Adwaita [GTK3]'
+gtk2="on"
+
+# Enable/Disable gtk3 Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gtk3
+#
+# Example:
+# on:  'Numix [GTK2], Adwaita [GTK3]'
+# off: 'Numix [GTK2]'
+gtk3="on"
+
+
+# IP Address
+
+
+# Website to ping for the public IP
+#
+# Default: 'http://ident.me'
+# Values:  'url'
+# Flag:    --ip_host
+public_ip_host="http://ident.me"
+
+# Public IP timeout.
+#
+# Default: '2'
+# Values:  'int'
+# Flag:    --ip_timeout
+public_ip_timeout=2
+
+
+# Desktop Environment
+
+
+# Show Desktop Environment version
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --de_version
+de_version="on"
+
+
+# Disk
+
+
+# Which disks to display.
+# The values can be any /dev/sdXX, mount point or directory.
+# NOTE: By default we only show the disk info for '/'.
+#
+# Default: '/'
+# Values:  '/', '/dev/sdXX', '/path/to/drive'.
+# Flag:    --disk_show
+#
+# Example:
+# disk_show=('/' '/dev/sdb1'):
+#      'Disk (/): 74G / 118G (66%)'
+#      'Disk (/mnt/Videos): 823G / 893G (93%)'
+#
+# disk_show=('/'):
+#      'Disk (/): 74G / 118G (66%)'
+#
+disk_show=('/')
+
+# Disk subtitle.
+# What to append to the Disk subtitle.
+#
+# Default: 'mount'
+# Values:  'mount', 'name', 'dir', 'none'
+# Flag:    --disk_subtitle
+#
+# Example:
+# name:   'Disk (/dev/sda1): 74G / 118G (66%)'
+#         'Disk (/dev/sdb2): 74G / 118G (66%)'
+#
+# mount:  'Disk (/): 74G / 118G (66%)'
+#         'Disk (/mnt/Local Disk): 74G / 118G (66%)'
+#         'Disk (/mnt/Videos): 74G / 118G (66%)'
+#
+# dir:    'Disk (/): 74G / 118G (66%)'
+#         'Disk (Local Disk): 74G / 118G (66%)'
+#         'Disk (Videos): 74G / 118G (66%)'
+#
+# none:   'Disk: 74G / 118G (66%)'
+#         'Disk: 74G / 118G (66%)'
+#         'Disk: 74G / 118G (66%)'
+disk_subtitle="mount"
+
+# Disk percent.
+# Show/Hide disk percent.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --disk_percent
+#
+# Example:
+# on:  'Disk (/): 74G / 118G (66%)'
+# off: 'Disk (/): 74G / 118G'
+disk_percent="on"
+
+
+# Song
+
+
+# Manually specify a music player.
+#
+# Default: 'auto'
+# Values:  'auto', 'player-name'
+# Flag:    --music_player
+#
+# Available values for 'player-name':
+#
+# amarok
+# audacious
+# banshee
+# bluemindo
+# clementine
+# cmus
+# deadbeef
+# deepin-music
+# dragon
+# elisa
+# exaile
+# gnome-music
+# gmusicbrowser
+# gogglesmm
+# guayadeque
+# io.elementary.music
+# iTunes
+# juk
+# lollypop
+# mocp
+# mopidy
+# mpd
+# muine
+# netease-cloud-music
+# olivia
+# playerctl
+# pogo
+# pragha
+# qmmp
+# quodlibet
+# rhythmbox
+# sayonara
+# smplayer
+# spotify
+# strawberry
+# tauonmb
+# tomahawk
+# vlc
+# xmms2d
+# xnoise
+# yarock
+music_player="auto"
+
+# Format to display song information.
+#
+# Default: '%artist% - %album% - %title%'
+# Values:  '%artist%', '%album%', '%title%'
+# Flag:    --song_format
+#
+# Example:
+# default: 'Song: Jet - Get Born - Sgt Major'
+song_format="%artist% - %album% - %title%"
+
+# Print the Artist, Album and Title on separate lines
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --song_shorthand
+#
+# Example:
+# on:  'Artist: The Fratellis'
+#      'Album: Costello Music'
+#      'Song: Chelsea Dagger'
+#
+# off: 'Song: The Fratellis - Costello Music - Chelsea Dagger'
+song_shorthand="off"
+
+# 'mpc' arguments (specify a host, password etc).
+#
+# Default:  ''
+# Example: mpc_args=(-h HOST -P PASSWORD)
+mpc_args=()
+
+
+# Text Colors
+
+
+# Text Colors
+#
+# Default:  'distro'
+# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
+# Flag:     --colors
+#
+# Each number represents a different part of the text in
+# this order: 'title', '@', 'underline', 'subtitle', 'colon', 'info'
+#
+# Example:
+# colors=(distro)      - Text is colored based on Distro colors.
+# colors=(4 6 1 8 8 6) - Text is colored in the order above.
+colors=(distro)
+
+
+# Text Options
+
+
+# Toggle bold text
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --bold
+bold="on"
+
+# Enable/Disable Underline
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --underline
+underline_enabled="on"
+
+# Underline character
+#
+# Default:  '-'
+# Values:   'string'
+# Flag:     --underline_char
+underline_char="-"
+
+
+# Info Separator
+# Replace the default separator with the specified string.
+#
+# Default:  ':'
+# Flag:     --separator
+#
+# Example:
+# separator="->":   'Shell-> bash'
+# separator=" =":   'WM = dwm'
+separator=":"
+
+
+# Color Blocks
+
+
+# Color block range
+# The range of colors to print.
+#
+# Default:  '0', '15'
+# Values:   'num'
+# Flag:     --block_range
+#
+# Example:
+#
+# Display colors 0-7 in the blocks.  (8 colors)
+# neofetch --block_range 0 7
+#
+# Display colors 0-15 in the blocks. (16 colors)
+# neofetch --block_range 0 15
+block_range=(0 15)
+
+# Toggle color blocks
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --color_blocks
+color_blocks="on"
+
+# Color block width in spaces
+#
+# Default:  '3'
+# Values:   'num'
+# Flag:     --block_width
+block_width=3
+
+# Color block height in lines
+#
+# Default:  '1'
+# Values:   'num'
+# Flag:     --block_height
+block_height=1
+
+# Color Alignment
+#
+# Default: 'auto'
+# Values: 'auto', 'num'
+# Flag: --col_offset
+#
+# Number specifies how far from the left side of the terminal (in spaces) to
+# begin printing the columns, in case you want to e.g. center them under your
+# text.
+# Example:
+# col_offset="auto" - Default behavior of neofetch
+# col_offset=7      - Leave 7 spaces then print the colors
+col_offset="auto"
+
+# Progress Bars
+
+
+# Bar characters
+#
+# Default:  '-', '='
+# Values:   'string', 'string'
+# Flag:     --bar_char
+#
+# Example:
+# neofetch --bar_char 'elapsed' 'total'
+# neofetch --bar_char '-' '='
+bar_char_elapsed="-"
+bar_char_total="="
+
+# Toggle Bar border
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --bar_border
+bar_border="on"
+
+# Progress bar length in spaces
+# Number of chars long to make the progress bars.
+#
+# Default:  '15'
+# Values:   'num'
+# Flag:     --bar_length
+bar_length=15
+
+# Progress bar colors
+# When set to distro, uses your distro's logo colors.
+#
+# Default:  'distro', 'distro'
+# Values:   'distro', 'num'
+# Flag:     --bar_colors
+#
+# Example:
+# neofetch --bar_colors 3 4
+# neofetch --bar_colors distro 5
+bar_color_elapsed="distro"
+bar_color_total="distro"
+
+
+# Info display
+# Display a bar with the info.
+#
+# Default: 'off'
+# Values:  'bar', 'infobar', 'barinfo', 'off'
+# Flags:   --cpu_display
+#          --memory_display
+#          --battery_display
+#          --disk_display
+#
+# Example:
+# bar:     '[---=======]'
+# infobar: 'info [---=======]'
+# barinfo: '[---=======] info'
+# off:     'info'
+cpu_display="off"
+memory_display="off"
+battery_display="off"
+disk_display="off"
+
+
+# Backend Settings
+
+
+# Image backend.
+#
+# Default:  'ascii'
+# Values:   'ascii', 'caca', 'chafa', 'jp2a', 'iterm2', 'off',
+#           'pot', 'termpix', 'pixterm', 'tycat', 'w3m', 'kitty'
+# Flag:     --backend
+image_backend="ascii"
+
+# Image Source
+#
+# Which image or ascii file to display.
+#
+# Default:  'auto'
+# Values:   'auto', 'ascii', 'wallpaper', '/path/to/img', '/path/to/ascii', '/path/to/dir/'
+#           'command output (neofetch --ascii "$(fortune | cowsay -W 30)")'
+# Flag:     --source
+#
+# NOTE: 'auto' will pick the best image source for whatever image backend is used.
+#       In ascii mode, distro ascii art will be used and in an image mode, your
+#       wallpaper will be used.
+image_source="auto"
+
+
+# Ascii Options
+
+
+# Ascii distro
+# Which distro's ascii art to display.
+#
+# Default: 'auto'
+# Values:  'auto', 'distro_name'
+# Flag:    --ascii_distro
+# NOTE: AIX, Alpine, Anarchy, Android, Antergos, antiX, "AOSC OS",
+#       "AOSC OS/Retro", Apricity, ArcoLinux, ArchBox, ARCHlabs,
+#       ArchStrike, XFerience, ArchMerge, Arch, Artix, Arya, Bedrock,
+#       Bitrig, BlackArch, BLAG, BlankOn, BlueLight, bonsai, BSD,
+#       BunsenLabs, Calculate, Carbs, CentOS, Chakra, ChaletOS,
+#       Chapeau, Chrom*, Cleanjaro, ClearOS, Clear_Linux, Clover,
+#       Condres, Container_Linux, CRUX, Cucumber, Debian, Deepin,
+#       DesaOS, Devuan, DracOS, DarkOs, DragonFly, Drauger, Elementary,
+#       EndeavourOS, Endless, EuroLinux, Exherbo, Fedora, Feren, FreeBSD,
+#       FreeMiNT, Frugalware, Funtoo, GalliumOS, Garuda, Gentoo, Pentoo,
+#       gNewSense, GNOME, GNU, GoboLinux, Grombyang, Guix, Haiku, Huayra,
+#       Hyperbola, janus, Kali, KaOS, KDE_neon, Kibojoe, Kogaion,
+#       Korora, KSLinux, Kubuntu, LEDE, LFS, Linux_Lite,
+#       LMDE, Lubuntu, Lunar, macos, Mageia, MagpieOS, Mandriva,
+#       Manjaro, Maui, Mer, Minix, LinuxMint, MX_Linux, Namib,
+#       Neptune, NetBSD, Netrunner, Nitrux, NixOS, Nurunner,
+#       NuTyX, OBRevenge, OpenBSD, openEuler, OpenIndiana, openmamba,
+#       OpenMandriva, OpenStage, OpenWrt, osmc, Oracle, OS Elbrus, PacBSD,
+#       Parabola, Pardus, Parrot, Parsix, TrueOS, PCLinuxOS, Peppermint,
+#       popos, Porteus, PostMarketOS, Proxmox, Puppy, PureOS, Qubes, Radix,
+#       Raspbian, Reborn_OS, Redstar, Redcore, Redhat, Refracted_Devuan,
+#       Regata, Rosa, sabotage, Sabayon, Sailfish, SalentOS, Scientific,
+#       Septor, SereneLinux, SharkLinux, Siduction, Slackware, SliTaz,
+#       SmartOS, Solus, Source_Mage, Sparky, Star, SteamOS, SunOS,
+#       openSUSE_Leap, openSUSE_Tumbleweed, openSUSE, SwagArch, Tails,
+#       Trisquel, Ubuntu-Budgie, Ubuntu-GNOME, Ubuntu-MATE, Ubuntu-Studio,
+#       Ubuntu, Venom, Void, Obarun, windows10, Windows7, Xubuntu, Zorin,
+#       and IRIX have ascii logos
+# NOTE: Arch, Ubuntu, Redhat, and Dragonfly have 'old' logo variants.
+#       Use '{distro name}_old' to use the old logos.
+# NOTE: Ubuntu has flavor variants.
+#       Change this to Lubuntu, Kubuntu, Xubuntu, Ubuntu-GNOME,
+#       Ubuntu-Studio, Ubuntu-Mate  or Ubuntu-Budgie to use the flavors.
+# NOTE: Arcolinux, Dragonfly, Fedora, Alpine, Arch, Ubuntu,
+#       CRUX, Debian, Gentoo, FreeBSD, Mac, NixOS, OpenBSD, android,
+#       Antrix, CentOS, Cleanjaro, ElementaryOS, GUIX, Hyperbola,
+#       Manjaro, MXLinux, NetBSD, Parabola, POP_OS, PureOS,
+#       Slackware, SunOS, LinuxLite, OpenSUSE, Raspbian,
+#       postmarketOS, and Void have a smaller logo variant.
+#       Use '{distro name}_small' to use the small variants.
+ascii_distro="auto"
+
+# Ascii Colors
+#
+# Default:  'distro'
+# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
+# Flag:     --ascii_colors
+#
+# Example:
+# ascii_colors=(distro)      - Ascii is colored based on Distro colors.
+# ascii_colors=(4 6 1 8 8 6) - Ascii is colored using these colors.
+ascii_colors=(distro)
+
+# Bold ascii logo
+# Whether or not to bold the ascii logo.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --ascii_bold
+ascii_bold="on"
+
+
+# Image Options
+
+
+# Image loop
+# Setting this to on will make neofetch redraw the image constantly until
+# Ctrl+C is pressed. This fixes display issues in some terminal emulators.
+#
+# Default:  'off'
+# Values:   'on', 'off'
+# Flag:     --loop
+image_loop="off"
+
+# Thumbnail directory
+#
+# Default: '~/.cache/thumbnails/neofetch'
+# Values:  'dir'
+thumbnail_dir="${XDG_CACHE_HOME:-${HOME}/.cache}/thumbnails/neofetch"
+
+# Crop mode
+#
+# Default:  'normal'
+# Values:   'normal', 'fit', 'fill'
+# Flag:     --crop_mode
+#
+# See this wiki page to learn about the fit and fill options.
+# https://github.com/dylanaraps/neofetch/wiki/What-is-Waifu-Crop%3F
+crop_mode="normal"
+
+# Crop offset
+# Note: Only affects 'normal' crop mode.
+#
+# Default:  'center'
+# Values:   'northwest', 'north', 'northeast', 'west', 'center'
+#           'east', 'southwest', 'south', 'southeast'
+# Flag:     --crop_offset
+crop_offset="center"
+
+# Image size
+# The image is half the terminal width by default.
+#
+# Default: 'auto'
+# Values:  'auto', '00px', '00%', 'none'
+# Flags:   --image_size
+#          --size
+image_size="auto"
+
+# Gap between image and text
+#
+# Default: '3'
+# Values:  'num', '-num'
+# Flag:    --gap
+gap=3
+
+# Image offsets
+# Only works with the w3m backend.
+#
+# Default: '0'
+# Values:  'px'
+# Flags:   --xoffset
+#          --yoffset
+yoffset=0
+xoffset=0
+
+# Image background color
+# Only works with the w3m backend.
+#
+# Default: ''
+# Values:  'color', 'blue'
+# Flag:    --bg_color
+background_color=
+
+
+# Misc Options
+
+# Stdout mode
+# Turn off all colors and disables image backend (ASCII/Image).
+# Useful for piping into another command.
+# Default: 'off'
+# Values: 'on', 'off'
+stdout="off"

.config/nvim/init.vim

@@ -0,0 +1,28 @@
+set number
+syntax on
+set expandtab shiftwidth=4 tabstop=4
+set autoindent
+set clipboard=unnamedplus
+
+" I want nvim using a venv for plugins and stuff
+let g:python3_host_prog = expand('~/.venvs/nvim/bin/python')
+
+" Plugins with vim-plug
+call plug#begin('~/.vim/plugged')
+
+Plug 'psf/black', { 'do': ':!pip install black' }
+Plug 'dense-analysis/ale'          " For linting and format-on-save
+Plug 'vim-python/python-syntax'    " Improved Python syntax highlighting
+Plug 'junegunn/fzf', { 'do': { -> fzf#install() } }  " Fuzzy finder
+Plug 'junegunn/fzf.vim'
+Plug 'nvim-treesitter/nvim-treesitter', {'do': ':TSUpdate'}  " Better syntax
+
+call plug#end()
+
+" Enable ALE for linting and formatting
+let g:ale_fix_on_save = 1
+let g:ale_linters = { 'python': ['flake8'] }
+let g:ale_fixers = { 'python': ['black'] }
+
+" Keybindings
+nnoremap <leader>f :Files<CR>  " Fuzzy file search

.config/plasma-workspace/latex.sh

@@ -0,0 +1,2 @@
+# LaTeX Import path
+export TEXINPUTS=/home/joe/College/SNHU/LaTeX:$(kpsepath tex | tr ':' '\n' | head -n 1):

.config/uwufetch/config

@@ -0,0 +1,14 @@
+#distro=manjaro
+#image=“/usr/lib/uwufetch/manjaro.png”
+ascii=true
+user=true
+os=true
+kernel=true
+cpu=true
+gpu=true
+ram=true
+resolution=true
+shell=true
+pkgs=true
+uptime=true
+colors=true

.gitconfig

@@ -0,0 +1,36 @@
+[user]
+	email = joe@kitsunehosting.net
+	name = KenwoodFox
+	signingkey = DD5E787D6C678F3F64
+[alias]
+	add-commit = !git add -A && git commit
+	report = log --author=J --since='2 sunday ago' --until='1 sunday ago' --format='%Cgreen%ci%Creset %s%Creset' --no-merges
+	report-csv = log --author=Marco --since='2 sunday ago' --until='1 sunday ago' --format='\"%ci\",\"%s\"' --no-merges
+	lg1 = log --graph --abbrev-commit --decorate --format=format:'%C(bold blue)%h%C(reset) - %C(bold green)(%ar)%C(reset) %C(white)%s%C(reset) %C(dim white)- %an%C(reset)%C(bold yellow)%d%C(reset)' --all
+	lg2 = log --graph --abbrev-commit --decorate --format=format:'%C(bold blue)%h%C(reset) - %C(bold cyan)%aD%C(reset) %C(bold green)(%ar)%C(reset)%C(bold yellow)%d%C(reset)%n''          %C(white)%s%C(reset) %C(dim white)- %an%C(reset)' --all
+	lg = !"git lg1"
+[credential]
+	helper = store
+[global]
+[push]
+	default = current
+	autoSetupRemote = true
+[init]
+	defaultBranch = main
+[pull]
+	rebase = false
+[branch]
+	autosetuprebase = always
+[safe]
+	directory = /opt/flutter
+[protocol "file"]
+	allow = always
+[filter "lfs"]
+	required = true
+	clean = git-lfs clean -- %f
+	smudge = git-lfs smudge -- %f
+	process = git-lfs filter-process
+[diff "fcinfo"]
+textconv = ~/.local/bin/fcinfo
+[core]
+	hooksPath = /home/joe/.githooks

.githooks/pre-commit

@@ -0,0 +1,44 @@
+#!/bin/sh
+# Global pre-commit hook: print effective identity and ask to continue.
+# Set BYPASS_COMMIT_IDENTITY_CHECK=1 to skip (e.g., in CI).
+
+[ -n "$BYPASS_COMMIT_IDENTITY_CHECK" ] && exit 0
+
+# Resolve effective identity (prefer repo-local config, fall back to global)
+name="$(git config --get user.name)"
+[ -z "$name" ] && name="$(git config --global --get user.name)"
+email="$(git config --get user.email)"
+[ -z "$email" ] && email="$(git config --global --get user.email)"
+
+branch="$(git rev-parse --abbrev-ref HEAD 2>/dev/null || echo '?')"
+remote="$(git remote -v | awk '/\(push\)/{print $2; exit}' | sed 's#^https\?://##; s#git@##' )"
+
+# Optional: block specific identities unless overridden
+# Add your alt(s) here, comma-separated (exact match on email or name).
+BLOCKED_EMAILS="${BLOCKED_EMAILS:-alt@example.com}"
+BLOCKED_NAMES="${BLOCKED_NAMES:-Alt Name}"
+
+is_blocked() {
+  needle="$1" haystack="$2"
+  printf '%s' "$haystack" | tr ',' '\n' | grep -Fxq "$needle"
+}
+
+printf '\n\033[1;33m⚠ Committing as:\033[0m \033[1m%s\033[0m <\033[1m%s\033[0m>\n' "$name" "$email"
+[ -n "$branch" ] && printf '   Branch: %s\n' "$branch"
+[ -n "$remote" ] && printf '   Remote: %s\n' "$remote"
+printf '   Double-check this is the right account.\n\n'
+
+if is_blocked "$email" "$BLOCKED_EMAILS" || is_blocked "$name" "$BLOCKED_NAMES"; then
+  printf '\033[1;31mBlocked identity detected.\033[0m Set BYPASS_COMMIT_IDENTITY_CHECK=1 to override just this commit.\n'
+  exit 1
+fi
+
+# Interactive confirm (skip if no TTY, e.g., merge drivers)
+if [ -t 0 ]; then
+  printf 'Continue with commit? [y/N] '
+  read ans
+  case "$ans" in
+    y|Y) ;;
+    *) echo "Commit aborted."; exit 1 ;;
+  esac
+fi

.local/bin/computer

@@ -0,0 +1,187 @@
+#!/usr/bin/env python3
+# Joe wrote this :P
+
+import argparse
+import json
+import os
+import re
+import subprocess
+import sys
+import urllib.error
+import urllib.request
+
+try:
+    from rich.console import Console
+    from rich.markdown import Markdown
+
+    RICH = True
+except ImportError:
+    RICH = False
+
+FAST_MODEL = "gemma3:4b"
+THINK_MODEL = "qwen3:4b"
+
+ANSI_ESCAPE = re.compile(r"\x1B(?:[@-Z\\-_]|\[[0-?]*[ -/]*[@-~])")
+
+SYSTEM_PROMPT = """
+You are Computer.
+
+Rules:
+- Respond in under 100 words unless asked for detail.
+- Prefer direct answers.
+- Use technical language.
+- Do not apologize.
+- For Linux questions assume Arch Linux.
+- For electronics questions assume the user is an engineer.
+- If providing a command, put the command first.
+- Do not explain your reasoning unless explicitly asked.
+- Do not show chain-of-thought.
+- Give final answers only.
+""".strip()
+
+
+def ollama_base_url():
+    host = os.environ.get("OLLAMA_HOST", "127.0.0.1:11434").strip()
+    if host.startswith(("http://", "https://")):
+        return host.rstrip("/")
+    return f"http://{host}".rstrip("/")
+
+
+def strip_ansi(text):
+    return ANSI_ESCAPE.sub("", text)
+
+
+def copy_to_clipboard(text):
+    commands = [
+        ["wl-copy"],
+        ["xclip", "-selection", "clipboard"],
+        ["xsel", "--clipboard", "--input"],
+    ]
+
+    for cmd in commands:
+        try:
+            subprocess.run(
+                cmd,
+                input=text,
+                text=True,
+                stdout=subprocess.DEVNULL,
+                stderr=subprocess.DEVNULL,
+                check=True,
+            )
+            return True
+        except Exception:
+            pass
+
+    return False
+
+
+def run_ollama_api(model, prompt):
+    url = f"{ollama_base_url()}/api/generate"
+    payload = json.dumps(
+        {
+            "model": model,
+            "prompt": prompt,
+            "stream": False,
+        }
+    ).encode()
+
+    req = urllib.request.Request(
+        url,
+        data=payload,
+        headers={"Content-Type": "application/json"},
+        method="POST",
+    )
+
+    with urllib.request.urlopen(req, timeout=600) as resp:
+        data = json.load(resp)
+
+    return strip_ansi(data.get("response", "")).strip()
+
+
+def run_ollama_cli(model, prompt):
+    result = subprocess.run(
+        ["ollama", "run", model, prompt],
+        capture_output=True,
+        text=True,
+    )
+    if result.returncode != 0:
+        err = (result.stderr or result.stdout or "ollama run failed").strip()
+        raise RuntimeError(err)
+    return strip_ansi(result.stdout).strip()
+
+
+def run_ollama(model, prompt):
+    try:
+        return run_ollama_api(model, prompt)
+    except (urllib.error.URLError, TimeoutError, json.JSONDecodeError) as exc:
+        print(f"computer: API unavailable ({exc}), using CLI", file=sys.stderr)
+        return run_ollama_cli(model, prompt)
+
+
+def print_response(response, raw):
+    if RICH and not raw:
+        console = Console()
+        console.print(Markdown(response))
+    else:
+        print(response)
+
+
+def main():
+    parser = argparse.ArgumentParser(
+        prog="computer",
+        description="Tiny local terminal AI",
+    )
+
+    parser.add_argument(
+        "--think",
+        action="store_true",
+        help="Use the larger reasoning model",
+    )
+
+    parser.add_argument(
+        "--copy",
+        action="store_true",
+        help="Copy response to clipboard",
+    )
+
+    parser.add_argument(
+        "--raw",
+        action="store_true",
+        help="Disable rich formatting",
+    )
+
+    parser.add_argument(
+        "prompt",
+        nargs="*",
+        help="Prompt text",
+    )
+
+    args = parser.parse_args()
+
+    model = THINK_MODEL if args.think else FAST_MODEL
+
+    user_prompt = " ".join(args.prompt)
+
+    stdin_text = ""
+    if not sys.stdin.isatty():
+        stdin_text = sys.stdin.read()
+
+    prompt = f"{SYSTEM_PROMPT}\n\nUser:\n{user_prompt}"
+
+    if stdin_text.strip():
+        prompt += f"\n\nInput:\n{stdin_text}"
+
+    try:
+        response = run_ollama(model, prompt)
+    except RuntimeError as exc:
+        print(f"computer: {exc}", file=sys.stderr)
+        sys.exit(1)
+
+    if args.copy:
+        copy_to_clipboard(response)
+
+    print_response(response, args.raw)
+
+
+if __name__ == "__main__":
+    main()

.local/bin/describe

@@ -0,0 +1,8 @@
+#!/bin/bash
+
+# Just to make it easy to always get the same
+# version description, 
+
+# Usage:
+# ./describe.sh
+git describe --abbrev=8 --always --tags

.local/bin/discompress

@@ -0,0 +1,82 @@
+#!/bin/bash
+#
+# Re-encode a video to a target size in MB.
+# Example:
+#    ./this_script.sh video.mp4 15
+
+T_SIZE="$2" # target size in MB
+T_FILE="${1%.*}-$2MB.mp4" # filename out
+
+# Original duration in seconds
+O_DUR=$(\
+    ffprobe \
+    -v error \
+    -show_entries format=duration \
+    -of csv=p=0 "$1")
+
+# Original audio rate
+O_ARATE=$(\
+    ffprobe \
+    -v error \
+    -select_streams a:0 \
+    -show_entries stream=bit_rate \
+    -of csv=p=0 "$1")
+
+# Original audio rate in KiB/s
+O_ARATE=$(\
+    awk \
+    -v arate="$O_ARATE" \
+    'BEGIN { printf "%.0f", (arate / 1024) }')
+
+# Target size is required to be less than the size of the original audio stream
+T_MINSIZE=$(\
+    awk \
+    -v arate="$O_ARATE" \
+    -v duration="$O_DUR" \
+    'BEGIN { printf "%.2f", ( (arate * duration) / 8192 ) }')
+
+# Equals 1 if target size is ok, 0 otherwise
+IS_MINSIZE=$(\
+    awk \
+    -v size="$T_SIZE" \
+    -v minsize="$T_MINSIZE" \
+    'BEGIN { print (minsize < size) }')
+
+# Give useful information if size is too small
+if [[ $IS_MINSIZE -eq 0 ]]; then
+    printf "%s\n" "Target size ${T_SIZE}MB is too small!" >&2
+    printf "%s %s\n" "Try values larger than" "${T_MINSIZE}MB" >&2
+    exit 1
+fi
+
+# Set target audio bitrate
+T_ARATE=$O_ARATE
+
+
+# Calculate target video rate - MB -> KiB/s
+T_VRATE=$(\
+    awk \
+    -v size="$T_SIZE" \
+    -v duration="$O_DUR" \
+    -v audio_rate="$O_ARATE" \
+    'BEGIN { print  ( ( size * 8192.0 ) / ( 1.048576 * duration ) - audio_rate) }')
+
+# Perform the conversion
+ffmpeg \
+    -y \
+    -i "$1" \
+    -c:v libx264 \
+    -b:v "$T_VRATE"k \
+    -pass 1 \
+    -an \
+    -f mp4 \
+    /dev/null \
+&& \
+ffmpeg \
+    -i "$1" \
+    -c:v libx264 \
+    -b:v "$T_VRATE"k \
+    -pass 2 \
+    -c:a aac \
+    -b:a "$T_ARATE"k \
+    $T_FILE

.local/bin/fcinfo

@@ -0,0 +1,293 @@
+#!/usr/bin/python3
+
+# -*- coding: utf8 -*-
+
+# ***************************************************************************
+# *                                                                         *
+# *   Copyright (c) 2015 Yorik van Havre <yorik@uncreated.net>              *
+# *                                                                         *
+# *   This program is free software; you can redistribute it and/or modify  *
+# *   it under the terms of the GNU Lesser General Public License (LGPL)    *
+# *   as published by the Free Software Foundation; either version 2 of     *
+# *   the License, or (at your option) any later version.                   *
+# *   for detail see the LICENCE text file.                                 *
+# *                                                                         *
+# *   This program is distributed in the hope that it will be useful,       *
+# *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+# *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+# *   GNU Library General Public License for more details.                  *
+# *                                                                         *
+# *   You should have received a copy of the GNU Library General Public     *
+# *   License along with this program; if not, write to the Free Software   *
+# *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  *
+# *   USA                                                                   *
+# *                                                                         *
+# ***************************************************************************
+
+__title__ = "FreeCAD File info utility"
+__author__ = "Yorik van Havre"
+__url__ = ["http://www.freecad.org"]
+__doc__ = """
+This utility prints information about a given FreeCAD file (*.FCStd)
+on screen, including document properties, number of included objects,
+object sizes and properties and values. Its main use is to compare
+two files and be able to see the differences in a text-based form.
+
+If no option is used, fcinfo prints the document properties and a list
+of properties of each object found in the given file.
+
+Usage:
+
+    fcinfo [options] myfile.FCStd
+
+Options:
+
+    -h, --help:      Prints this help text
+    -s, --short:     Do not print object properties. Only one line
+                     per object is printed, including its size and SHA1.
+                     This is sufficient to see that an object has
+                     changed, but not what exactly has changed.
+    -vs --veryshort: Only prints the document info, not objects info.
+                     This is sufficient to see if a file has changed, as
+                     its SHA1 code and timestamp will show it. But won't
+                     show details of what has changed.
+    -g  --gui:       Adds visual properties too (if not using -s or -vs)
+
+Git usage:
+
+    This script can be used as a textconv tool for git diff by
+    configuring your git folder as follows:
+
+     1) add to .gitattributes (or ~/.gitattributes for user-wide):
+
+         *.fcstd diff=fcinfo
+
+     2) add to .git/config (or ~/.gitconfig for user-wide):
+
+         [diff "fcinfo"]
+             textconv = /path/to/fcinfo
+
+    With this, when committing a .FCStd file with Git,
+    'git diff' will show you the difference between the two
+    texts obtained by fcinfo
+"""
+
+
+import sys
+import zipfile
+import xml.sax
+import os
+import hashlib
+import re
+
+
+class FreeCADFileHandler(xml.sax.ContentHandler):
+    def __init__(self, zfile, short=0):  # short: 0=normal, 1=short, 2=veryshort
+
+        xml.sax.ContentHandler.__init__(self)
+        self.zfile = zfile
+        self.obj = None
+        self.prop = None
+        self.count = "0"
+        self.contents = {}
+        self.short = short
+
+    def startElement(self, tag, attributes):
+
+        if tag == "Document":
+            self.obj = tag
+            self.contents = {}
+            self.contents["ProgramVersion"] = attributes["ProgramVersion"]
+            self.contents["FileVersion"] = attributes["FileVersion"]
+
+        elif tag == "Object":
+            if "name" in attributes:
+                name = self.clean(attributes["name"])
+                self.obj = name
+                if "type" in attributes:
+                    self.contents[name] = attributes["type"]
+
+        elif tag == "ViewProvider":
+            if "name" in attributes:
+                self.obj = self.clean(attributes["name"])
+
+        elif tag == "Part":
+            if self.obj:
+                r = self.zfile.read(attributes["file"])
+                s = r.__sizeof__()
+                if s < 1024:
+                    s = str(s) + "B"
+                elif s > 1048576:
+                    s = str(s / 1048576) + "M"
+                else:
+                    s = str(s / 1024) + "K"
+                s += " " + str(hashlib.sha1(r).hexdigest()[:12])
+                self.contents[self.obj] += " (" + s + ")"
+
+        elif tag == "Property":
+            self.prop = None
+            # skip "internal" properties, useless for a diff
+            if attributes["name"] not in [
+                "Symbol",
+                "AttacherType",
+                "MapMode",
+                "MapPathParameter",
+                "MapReversed",
+                "AttachmentOffset",
+                "SelectionStyle",
+                "TightGrid",
+                "GridSize",
+                "GridSnap",
+                "GridStyle",
+                "Lighting",
+                "Deviation",
+                "AngularDeflection",
+                "BoundingBox",
+                "Selectable",
+                "ShowGrid",
+            ]:
+                self.prop = attributes["name"]
+
+        elif tag in ["String", "Uuid", "Float", "Integer", "Bool", "Link"]:
+            if self.prop and ("value" in attributes):
+                if self.obj == "Document":
+                    self.contents[self.prop] = attributes["value"]
+                elif self.short == 0:
+                    if tag == "Float":
+                        self.contents[self.obj + "00000000::" + self.prop] = str(
+                            float(attributes["value"])
+                        )
+                    else:
+                        self.contents[self.obj + "00000000::" + self.prop] = attributes["value"]
+
+        elif tag in ["PropertyVector"]:
+            if self.prop and self.obj and (self.short == 0):
+                val = (
+                    "("
+                    + str(float(attributes["valueX"]))
+                    + ","
+                    + str(float(attributes["valueY"]))
+                    + ","
+                    + str(float(attributes["valueZ"]))
+                    + ")"
+                )
+                self.contents[self.obj + "00000000::" + self.prop] = val
+
+        elif tag in ["PropertyPlacement"]:
+            if self.prop and self.obj and (self.short == 0):
+                val = (
+                    "("
+                    + str(float(attributes["Px"]))
+                    + ","
+                    + str(float(attributes["Py"]))
+                    + ","
+                    + str(float(attributes["Pz"]))
+                    + ")"
+                )
+                val += (
+                    " ("
+                    + str(round(float(attributes["Q0"]), 4))
+                    + ","
+                    + str(round(float(attributes["Q1"]), 4))
+                    + ","
+                )
+                val += (
+                    str(round(float(attributes["Q2"]), 4))
+                    + ","
+                    + str(round(float(attributes["Q3"]), 4))
+                    + ")"
+                )
+                self.contents[self.obj + "00000000::" + self.prop] = val
+
+        elif tag in ["PropertyColor"]:
+            if self.prop and self.obj and (self.short == 0):
+                c = int(attributes["value"])
+                r = float((c >> 24) & 0xFF) / 255.0
+                g = float((c >> 16) & 0xFF) / 255.0
+                b = float((c >> 8) & 0xFF) / 255.0
+                val = str((r, g, b))
+                self.contents[self.obj + "00000000::" + self.prop] = val
+
+        elif tag == "Objects":
+            self.count = attributes["Count"]
+            self.obj = None
+
+            # Print all the contents of the document properties
+            items = self.contents.items()
+            items = sorted(items)
+            for key, value in items:
+                key = self.clean(key)
+                value = self.clean(value)
+                print("   " + key + " : " + value)
+            print("   Objects: (" + self.count + ")")
+            self.contents = {}
+
+    def endElement(self, tag):
+
+        if (tag == "Document") and (self.short != 2):
+            items = self.contents.items()
+            items = sorted(items)
+            for key, value in items:
+                key = self.clean(key)
+                if "00000000::" in key:
+                    key = "   " + key.split("00000000::")[1]
+                value = self.clean(value)
+                if value:
+                    print("        " + key + " : " + value)
+
+    def clean(self, value):
+
+        value = value.strip()
+        return value
+
+
+if __name__ == "__main__":
+
+    if len(sys.argv) < 2:
+        print(__doc__)
+        sys.exit()
+
+    if ("-h" in sys.argv[1:]) or ("--help" in sys.argv[1:]):
+        print(__doc__)
+        sys.exit()
+
+    ext = sys.argv[-1].rsplit(".")[-1].lower()
+    if not ext.startswith("fcstd") and not ext.startswith("fcbak"):
+        print(__doc__)
+        sys.exit()
+
+    if ("-vs" in sys.argv[1:]) or ("--veryshort" in sys.argv[1:]):
+        short = 2
+    elif ("-s" in sys.argv[1:]) or ("--short" in sys.argv[1:]):
+        short = 1
+    else:
+        short = 0
+
+    if ("-g" in sys.argv[1:]) or ("--gui" in sys.argv[1:]):
+        gui = True
+    else:
+        gui = False
+
+    zfile = zipfile.ZipFile(sys.argv[-1])
+
+    if not "Document.xml" in zfile.namelist():
+        sys.exit(1)
+    doc = zfile.read("Document.xml")
+    if gui and "GuiDocument.xml" in zfile.namelist():
+        guidoc = zfile.read("GuiDocument.xml")
+        guidoc = re.sub(b"<\?xml.*?-->", b" ", guidoc, flags=re.MULTILINE | re.DOTALL)
+        # a valid xml doc can have only one root element. So we need to insert
+        # all the contents of the GUiDocument <document> tag into the main one
+        doc = re.sub(b"<\/Document>", b"", doc, flags=re.MULTILINE | re.DOTALL)
+        guidoc = re.sub(b"<Document.*?>", b" ", guidoc, flags=re.MULTILINE | re.DOTALL)
+        doc += guidoc
+    s = os.path.getsize(sys.argv[-1])
+    if s < 1024:
+        s = str(s) + "B"
+    elif s > 1048576:
+        s = str(s / 1048576) + "M"
+    else:
+        s = str(s / 1024) + "K"
+    print("Document: " + sys.argv[-1] + " (" + s + ")")
+    print("   SHA1: " + str(hashlib.sha1(open(sys.argv[-1], "rb").read()).hexdigest()))
+    xml.sax.parseString(doc, FreeCADFileHandler(zfile, short))

.local/bin/foxfetch

@@ -0,0 +1,3 @@
+#!/bin/bash
+
+uwufetch | sed 's/joe/vixi/g'

.local/bin/qalctex

@@ -0,0 +1,100 @@
+#!/bin/python
+
+import subprocess
+import re
+
+# Dictionary for symbol conversion to LaTeX format
+latex_symbols = {
+    "Ω": r"\Omega",
+    "ohm": r"\Omega",
+    "A": r"\text{A}",
+    "V": r"\text{V}",
+    "milliamperes": r"\text{mA}",
+    "*": r"\cdot",
+    "N*m": r"\text{N} \cdot \text{m}",
+    "in*lb": r"\text{in} \cdot \text{lb}",
+    "||": r"\|",
+    "−": r"-",
+    "μ": r"\mu",
+    "−": r"-",
+}
+
+
+def run_qalc(expression):
+    # Run qalc with the provided expression
+    result = subprocess.run(["qalc", expression], stdout=subprocess.PIPE, text=True)
+    output = result.stdout
+    return output
+
+
+def format_expression_for_latex(expression):
+    # Replace the units and special characters in the input expression using the dictionary
+    for symbol, latex_symbol in latex_symbols.items():
+        expression = expression.replace(symbol, latex_symbol)
+
+    return expression
+
+
+def format_result_for_latex(output):
+    # Get the last line of qalc output (the answer)
+    output = output.strip().split("\n")[-1]
+
+    # Check if the result is approximate (contains "≈")
+    approx_match = "≈" in output
+
+    # Extract the value and unit from the result
+    match = re.search(r"(≈|=)\s*([-\d\.]+)\s*(.*)", output)
+    if match:
+        _, value, unit = match.groups()
+        # Replace the units and special characters using the dictionary
+        unit = unit.strip()
+        for symbol, latex_symbol in latex_symbols.items():
+            unit = unit.replace(symbol, latex_symbol)
+
+        # Use = or \approx in LaTeX based on whether the result is approximate
+        equal_symbol = r"\approx" if approx_match else "="
+
+        # Only add \, if there's a unit
+        if unit:
+            latex_result = f"{equal_symbol} {value.strip()} \\, {unit}"
+        else:
+            latex_result = f"{equal_symbol} {value.strip()}"
+
+        return latex_result
+    return output  # Fallback to returning the raw qalc output if no match
+
+
+def copy_to_clipboard(text):
+    # Use wl-copy to send the text to the clipboard
+    subprocess.run(["wl-copy"], input=text, text=True)
+
+
+def main():
+    try:
+        while True:
+            # Input the qalc expression
+            expression = input("\nEnter qalc expression (Ctrl+C to exit): ")
+
+            # Run qalc and get the result
+            qalc_output = run_qalc(expression)
+
+            # Format the input expression for LaTeX
+            latex_expression = format_expression_for_latex(expression)
+
+            # Format the output result for LaTeX
+            latex_result = format_result_for_latex(qalc_output)
+
+            # Combine both input expression and result for final LaTeX output
+            final_latex_output = f"{latex_expression} {latex_result}"
+
+            # Print and copy to clipboard
+            print(f"Final LaTeX output:\n{final_latex_output}")
+            copy_to_clipboard(final_latex_output)
+            print("LaTeX result copied to clipboard!")
+
+    except KeyboardInterrupt:
+        print("\nExiting...")
+
+
+if __name__ == "__main__":
+    main()

.local/bin/switch_keys.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# From here https://github.com/drduh/YubiKey-Guide#readme
+
+gpg-connect-agent "scd serialno" "learn --force" /bye

.oh-my-zsh/custom/custom_alias.zsh

@@ -0,0 +1,5 @@
+# This line allows the word 'custom' to specify the dotfiles bare git repo
+alias config='git --git-dir=$HOME/.dotfiles/ --work-tree=$HOME'
+
+# Alias 'fucking' to 'sudo' cuz of this meme https://www.memesmonkey.com/topic/linux#&gid=1&pid=10
+alias fucking=sudo

.ssh/config

@@ -0,0 +1,215 @@
+# SSH For my own hosts
+# Oxygen
+Host oxygen
+	HostName 10.85.3.30
+	User joe
+
+Host crawler.kitsunehosting.net
+    HostName crawler.kitsunehosting.net
+    User joe
+
+host edge
+    HostName 10.85.5.52
+    User joe
+
+host lakemesh
+    HostName 172.25.72.74
+    User joe
+
+host portainer
+    HostName 10.85.3.60
+    User joe
+
+host bitwarden
+    HostName 10.85.3.83
+    User joe
+
+host frigate
+    IdentityFile ~/.ssh/hydroxonium
+    HostName 10.85.5.20
+    User joe
+
+host portainer
+    IdentityFile ~/.ssh/hydroxonium
+    HostName 10.85.3.60
+    User joe
+
+host lithium
+    IdentityFile ~/.ssh/gallium
+    HostName 10.85.3.112
+    IPQoS cs0 cs0
+    User joe
+
+host matrix
+    IdentityFile ~/.ssh/gallium
+    HostName 10.85.3.38
+    user joe
+
+host crackheadbot
+    HostName 10.85.3.182
+    User joe
+
+host dockerhost
+    HostName 10.85.3.75
+    User joe
+
+Host cobalt
+    HostName 10.85.3.6
+    User root
+
+Host ssh.kitsunehosting.net
+    port 2222
+    IdentityFile ~/.ssh/gitea
+
+# Supermicro machine in the server rack
+Host manganese
+    HostName 10.85.3.5
+    User root
+
+# R710
+Host nickel
+    HostName 10.85.3.4
+    User root
+
+# My main NAS
+Host zinc
+    IdentityFile ~/.ssh/hydroxonium
+    HostName 10.85.3.120
+    User joe
+
+# APRS 
+Host houston
+    IdentityFile ~/.ssh/hydroxonium
+    HostName 10.85.3.39
+    User joe
+
+Host deck
+    HostName 10.85.3.221
+    User deck
+
+# booru Image Server
+Host booru
+    IdentityFile ~/.ssh/hydroxonium
+    HostName 10.85.3.71
+    User joe
+
+# Caddy
+Host caddy
+    IdentityFile ~/.ssh/hydroxonium
+    HostName 10.85.3.9
+    User joe
+
+# Robotics
+# 1721's main NAS
+Host flattoaster
+    HostName 10.17.21.10
+    PreferredAuthentications password
+    IdentityFile none
+    User root
+
+Host robotics-vps
+    HostName 50.116.52.250
+    User root
+
+Host lapis
+    HostName 10.17.21.30
+    User joe
+
+
+# SSH for git servers
+# Gitlab
+Host gitlab.com
+    IdentityFile ~/.ssh/gitlab
+    UpdateHostKeys no
+
+# Arch User Repo
+Host aur.archlinux.org
+    IdentityFile ~/.ssh/aur
+    User aur
+
+# Personal Git Server
+Host ssh.kitsunehosting.net
+    Port 2222
+    IdentityFile ~/.ssh/gitea
+
+# Github
+Host github.com
+    Hostname ssh.github.com
+    Port 443
+    User git
+    IdentityFile ~/.ssh/github
+
+Host snowsunehost
+    Hostname 10.85.3.65
+    User joe
+
+# Also github but, for snowsune
+Host github_snowsune
+    HostName ssh.github.com
+    User git
+    Port 443
+    IdentityFile ~/.ssh/github_snowsune
+    IdentitiesOnly yes
+
+# Bitbucket
+Host bitbucket.org
+    IdentityFile ~/.ssh/bitbucket
+
+# Silvertech
+Host devserver
+    HostName 10.12.32.35
+    User joe
+
+Host bosch
+    HostName 192.168.0.41
+    #IdentityFile ~/.ssh/silvertech/ssh_host_dsa_key
+    #UpdateHostKeys no
+
+Host retropie
+    HostName 10.19.80.2
+    User pi
+    IdentityFile ~/.ssh/silvertech/silvertech
+    IdentitiesOnly yes
+
+# The little docker host in the closet
+# Runs the vestabot image
+Host stdocker1
+    HostName 10.10.20.27
+    IdentityFile ~/.ssh/silvertech-iot
+
+# Platformio remote
+Host pio-remote
+    HostName 10.144.0.15
+    IdentityFile ~/.ssh/silvertech-iot
+
+# Little mini-pc in the IOT room
+Host pioremote
+    # This is actually a zerotier ip
+    HostName 10.144.0.15
+    IdentityFile ~/.ssh/silvertech/silvertech
+    IdentitiesOnly yes
+
+# Work laptop
+Host workLaptop
+    HostName 10.144.236.234
+    IdentityFile ~/.ssh/hydroxonium
+
+# Argen pi
+Host argen
+    HostName 10.10.20.11
+    User joe
+    IdentityFile ~/.ssh/gitlab
+
+# Millyard labs
+Host git.millyardlabs.com
+    IdentityFile ~/.ssh/millyard
+
+Host asterisk
+    HostName 10.85.3.155
+    IdentityFile ~/.ssh/hydroxonium
+
+# Pterodactyal stuff
+Host wing1.kitsunehosting.net
+    HostName wing1.kitsunehosting.net
+    PreferredAuthentications password
+    IdentityFile none

.vimrc

@@ -0,0 +1,4 @@
+set spell spelllang=en_us
+syntax on
+set number
+

.zshrc

@@ -1,10 +1,24 @@
 # Joe added this:
-#neofetch | lolcat
 uwufetch
+echo ""
+fortune -a
+
+# This is for platformio on work machine
+path+=("$HOME/.platformio/penv/bin")
+
+# Add my bins to path
+path+=("$HOME/.local/bin")
+path+=("$HOME/Pictures/Furry/Scripts")
+path+=("/opt/balena-cli/")
+export PATH
+
+# LaTeX Import path
+export TEXINPUTS=/home/joe/College/SNHU/LaTeX:$(kpsepath tex | tr ':' '\n' | head -n 1):
+
+# Not sure why but, needed to path these manually for ruby bin
+path+=("/home/joe/.local/share/gem/ruby/3.3.0/bin")
 
 # Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
-# Initialization code that may require console input (password prompts, [y/n]
-# confirmations, etc.) must go above this block; everything else may go below.
 if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
   source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
 fi
@@ -13,7 +27,7 @@ fi
 # export PATH=$HOME/bin:/usr/local/bin:$PATH
 
 # Path to your oh-my-zsh installation.
-export ZSH="/home/joe/.oh-my-zsh"
+export ZSH="$HOME/.oh-my-zsh"
 
 # Set name of the theme to load --- if set to "random", it will
 # load a random theme each time oh-my-zsh is loaded, in which case,
@@ -89,6 +103,7 @@ plugins=(
     zsh-autosuggestions
     zsh-syntax-highlighting
     zsh-z
+    virtualenv
 )
 
 source $ZSH/oh-my-zsh.sh
@@ -101,11 +116,11 @@ source $ZSH/oh-my-zsh.sh
 # export LANG=en_US.UTF-8
 
 # Preferred editor for local and remote sessions
-# if [[ -n $SSH_CONNECTION ]]; then
-#   export EDITOR='vim'
-# else
-#   export EDITOR='mvim'
-# fi
+if [[ -n $SSH_CONNECTION ]]; then
+  export EDITOR='ee'
+else
+  export EDITOR='nano'
+fi
 
 # Compilation flags
 # export ARCHFLAGS="-arch x86_64"
@@ -119,8 +134,12 @@ source $ZSH/oh-my-zsh.sh
 # alias zshconfig="mate ~/.zshrc"
 # alias ohmyzsh="mate ~/.oh-my-zsh"
 
-# Added this for dotfiles alias, may want to make a custom config folder later.
-alias config='/usr/bin/git --git-dir=$HOME/.dotfiles/ --work-tree=$HOME'
+# https://www.reddit.com/r/archlinux/comments/p0y2hs/flatpak/
+alias update="paru -Syu --skipreview; flatpak update; sudo snap refresh"
+
+# Power
+alias upshift="powerprofilesctl set performance"
+alias downshift="powerprofilesctl set power-saver"
 
 [ -f ~/.fzf.zsh ] && source ~/.fzf.zsh
 
@@ -129,3 +148,23 @@ export FZF_DEFAULT_OPTS="--layout=reverse --inline-info --height=80%"
 
 # To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
 [[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
+
+
+# This is fo cumtanks lol
+cumtanks() {
+  cd /home/joe/git/Snowsune/cumtanks || return 1
+  EPOCH=$(date +%s)
+  DATA_JSON="www/data.json"
+  tmpfile=$(mktemp)
+  awk -v epoch="$EPOCH" '
+    BEGIN { added=0 }
+    /"logs"[ \t]*:[ \t]*\[/ { inlogs=1 }
+    inlogs && /\]/ && !added {
+      sub(/\]/, "    ,{ \"date\": " epoch ", \"text\": \"\" }\n  ]")
+      added=1
+    }
+    { print }
+  ' "$DATA_JSON" > "$tmpfile" && mv "$tmpfile" "$DATA_JSON"
+  sed -i 's/,\n  ]/\n  ]/' "$DATA_JSON"
+  code -g "$DATA_JSON":$(grep -n '"logs"' "$DATA_JSON" | cut -d: -f1)
+}

README.md

@@ -0,0 +1,54 @@
+# Clone repo
+```git clone --bare https://kitsunehosting.net/gitea/Kenwood/dotfiles.git $HOME/.dotfiles```
+
+# Make a temp alias (will be perminant via .zshrc)
+```alias config='/usr/bin/git --git-dir=$HOME/.dotfiles/ --work-tree=$HOME'```
+
+# Pull stuff down!
+```config checkout```
+
+# If things offend, backup or delete existing/differeing files.
+# This could work but idk
+```
+mkdir -p .config-backup && \
+config checkout 2>&1 | egrep "\s+\." | awk {'print $1'} | \
+xargs -I{} mv {} .config-backup/{}
+```
+
+# Also use this to keep it all neat!
+```
+config config --local status.showUntrackedFiles no
+```
+
+
+# Also, clone all the zsh plugins
+# Install omzsh!
+```
+sh -c "$(curl -fsSL https://raw.github.com/ohmyzsh/ohmyzsh/master/tools/install.sh)"
+```
+
+# p10k
+```
+git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k
+```
+
+# Autocompletions
+```
+git clone https://github.com/zsh-users/zsh-autosuggestions ${ZSH_CUSTOM:-~/.oh-my-zsh/custom}/plugins/zsh-autosuggestions
+```
+
+# Syntax highlighting
+```
+git clone https://github.com/zsh-users/zsh-syntax-highlighting.git ${ZSH_CUSTOM:-~/.oh-my-zsh/custom}/plugins/zsh-syntax-highlighting
+```
+
+# zsh-z
+```
+git clone https://github.com/agkozak/zsh-z $ZSH_CUSTOM/plugins/zsh-z
+```
+
+# fzf
+```
+git clone --depth 1 https://github.com/junegunn/fzf.git ~/.fzf
+~/.fzf/install
+```

schemes/laptop_default.kksrc

@@ -0,0 +1,150 @@
+[kwin][Global Shortcuts]
+Activate Window Demanding Attention=Ctrl+Alt+A
+ClearLastMouseMark=Meta+Shift+F12
+ClearMouseMarks=Meta+Shift+F11
+Decrease Opacity=
+Expose=Ctrl+F9
+ExposeAll=Ctrl+F10; Launch (C)
+ExposeClass=Ctrl+F7
+Increase Opacity=
+Invert Screen Colors=
+Kill Window=Ctrl+Alt+Esc
+MoveMouseToCenter=Meta+F6
+MoveMouseToFocus=Meta+F5
+MoveZoomDown=
+MoveZoomLeft=
+MoveZoomRight=
+MoveZoomUp=
+Setup Window Shortcut=
+Show Desktop=Meta+D
+ShowDesktopGrid=Ctrl+F8
+Suspend Compositing=Alt+Shift+F12
+Switch One Desktop Down=Meta+Ctrl+Down
+Switch One Desktop Up=Meta+Ctrl+Up
+Switch One Desktop to the Left=Meta+Ctrl+Left
+Switch One Desktop to the Right=Meta+Ctrl+Right
+Switch Window Down=
+Switch Window Left=
+Switch Window Right=
+Switch Window Up=
+Switch to Desktop 1=Ctrl+F1
+Switch to Desktop 10=
+Switch to Desktop 11=
+Switch to Desktop 12=
+Switch to Desktop 13=
+Switch to Desktop 14=
+Switch to Desktop 15=
+Switch to Desktop 16=
+Switch to Desktop 17=
+Switch to Desktop 18=
+Switch to Desktop 19=
+Switch to Desktop 2=Ctrl+F2
+Switch to Desktop 20=
+Switch to Desktop 3=Ctrl+F3
+Switch to Desktop 4=Ctrl+F4
+Switch to Desktop 5=
+Switch to Desktop 6=
+Switch to Desktop 7=
+Switch to Desktop 8=
+Switch to Desktop 9=
+Switch to Next Desktop=
+Switch to Next Screen=
+Switch to Previous Desktop=
+Switch to Previous Screen=
+Switch to Screen 0=
+Switch to Screen 1=
+Switch to Screen 2=
+Switch to Screen 3=
+Switch to Screen 4=
+Switch to Screen 5=
+Switch to Screen 6=
+Switch to Screen 7=
+Toggle Night Color=
+Toggle Window Raise/Lower=
+ToggleCurrentThumbnail=Meta+Ctrl+T
+Walk Through Desktop List=
+Walk Through Desktop List (Reverse)=
+Walk Through Desktops=
+Walk Through Desktops (Reverse)=
+Walk Through Windows=Alt+Tab
+Walk Through Windows (Reverse)=Alt+Shift+Backtab
+Walk Through Windows Alternative=
+Walk Through Windows Alternative (Reverse)=
+Walk Through Windows of Current Application=Alt+`
+Walk Through Windows of Current Application (Reverse)=Alt+~
+Walk Through Windows of Current Application Alternative=
+Walk Through Windows of Current Application Alternative (Reverse)=
+Window Above Other Windows=
+Window Below Other Windows=
+Window Close=Alt+F4
+Window Fullscreen=
+Window Grow Horizontal=
+Window Grow Vertical=
+Window Lower=
+Window Maximize=Meta+W
+Window Maximize Horizontal=
+Window Maximize Vertical=
+Window Minimize=Meta+Alt+Down
+Window Move=
+Window No Border=
+Window On All Desktops=
+Window One Desktop Down=
+Window One Desktop Up=
+Window One Desktop to the Left=
+Window One Desktop to the Right=
+Window Operations Menu=Alt+F3
+Window Pack Down=
+Window Pack Left=
+Window Pack Right=
+Window Pack Up=
+Window Quick Tile Bottom=Meta+Down
+Window Quick Tile Bottom Left=Meta+Shift+Left
+Window Quick Tile Bottom Right=Meta+Shift+Down
+Window Quick Tile Left=Meta+Left
+Window Quick Tile Right=Meta+Right
+Window Quick Tile Top=Meta+Up
+Window Quick Tile Top Left=Meta+Shift+Up
+Window Quick Tile Top Right=Meta+Shift+Right
+Window Raise=
+Window Resize=
+Window Shade=
+Window Shrink Horizontal=
+Window Shrink Vertical=
+Window to Desktop 1=
+Window to Desktop 10=
+Window to Desktop 11=
+Window to Desktop 12=
+Window to Desktop 13=
+Window to Desktop 14=
+Window to Desktop 15=
+Window to Desktop 16=
+Window to Desktop 17=
+Window to Desktop 18=
+Window to Desktop 19=
+Window to Desktop 2=
+Window to Desktop 20=
+Window to Desktop 3=
+Window to Desktop 4=
+Window to Desktop 5=
+Window to Desktop 6=
+Window to Desktop 7=
+Window to Desktop 8=
+Window to Desktop 9=
+Window to Next Desktop=
+Window to Next Screen=
+Window to Previous Desktop=
+Window to Previous Screen=
+Window to Screen 0=
+Window to Screen 1=
+Window to Screen 2=
+Window to Screen 3=
+Window to Screen 4=
+Window to Screen 5=
+Window to Screen 6=
+Window to Screen 7=
+view_actual_size=Meta+0
+view_zoom_in=Meta+=
+view_zoom_out=Meta+-
+
+[yakuake][Global Shortcuts]
+toggle-window-state=F12